Propshaft Overhaul

[Tom_]

i tried as andy10v and Pirvu Eugen said,but no chance any ideas?

[hugokx]

Hi all,

Does anybody know any reference (or the dimension) for the UJ cross ? Any place where I could get it?

Thanks

[Holla]

Does anyone know what cv boots are used?

[yodasfro]

Gkn Ms6k024

[Holla]

Gkn Ms6k024

thanks, now i just need to find where i can buy them

[Tom_]

any pictures of propshaft cv joints,how are they get fitted?I dont know yet the order of parts

[Tom_]

Are concave washers used on cv joints on propshaft?I am not sure now,because on innner cv joints at drive shafts,they are placed, but in Etka its not any mentioned...

[yodasfro]

No washers are used on the propshaft cv's.

[Tom_]

Thank you

[PaulJ]

Part Numbers ??

Hi All

Did anyone find the part number of the original centre bearing (Believed to be FAG) or is everyone just going with the BMW item Febi 05196

Also, Anyone have the number for the centre UJ ??

Cheers Paul

By searching for the BMW M5 prop bearing item i found some more part numbers
2611 1 206 502 BMW
2612 1 104 335 BMW
10481 LEMFÖRDER
05196 FEBI BILSTEIN
20870004 SWAG
300 261 1191/S MEYLE
5132 BIRTH
08.34.050 TRUCKTEC AUTOMOTIVE
500 012 JP GROUP
30163 ORIGINAL IMPERIUM

with OE no 8A0 521 113A i found
BMCB214 30x133 Bayley Morris Ltd

30mm inner diameter ???
55mm outer diameter

can someone please confirm those 30mm??

..and what about this:
BMCB221 30x130x15 AUDI A8 OE # 4D0-521-113
Bearing Diameter 30
Bearing Width 15.5
Bolt Hole Centres 131
Bearing Height 42
Might be useable, too..

P.S.
http://www.febi-parts.com/article.ph...rchInput=05196
http://www.meyle.com/DE/Ersatzteile/...0%20261%201191

[Skull]

Hello!

I need a replacement U-joint, i was trying hard to find one, but no luck.

the PN`s:

Neapco 20382
SUZUKI 2720053830
SUZUKI 2720066810
SUZUKI 2720083820
MOOG 408
GMB 2200191
ACDelco 45U0187

Measures:

A1 LOCK-UP: 2.756
A2 LOCK-UP: 2.756
B1 BEARING CAP DIAMETER: 1.024
B2 BEARING CAP DIAMETER: 1.024
BEARING TYPE: ROUND-OSR

please help

[Holla]

bought one of GKN, they have the one you need since they bought the firm that produced them

[Holla]

a warning though, if you change the joint between the axles, you will probably nee to rebalance the axle again

[Skull]

a gkn u joint? what is the part number??

[Holla]

Yepp, the number is 12111 at gkn