UPDATE:
As mentioned to quite a few of you via email. The image was not supposed to be on the forums. This has caused quite a few concerned members with the usual “where is mine” “when is my turn”
And to that I respectfully answer :
In the order they came in.
I didn’t want to post on the forums/groups until I had all my ducks in a row. I don’t need to iterate how long of a project this has been for us (and all parties involved) and while I do appreciate your patience , understand that this was not our intention.
The goal all along was to have a universal hub that would work right across the board. Unfortunately post making samples it was determined that the 7A/3B/MC units would need a redesign which put a huge disappointment in the project.
We have the ADU & ABY drive rings but a hub that isn’t universal to the 7A and 3B. In the interim considering the AAN was the most important aspect of this project , I decided to fast track (insert joke about fast track and 2.5 years not being in the same sentence) the AAN members first.
Once we have sorted the AAN members , I will move onto the ADU & ABY members and will finish with the 7A & 3B members.
I have spent the better part of the afternoon compiling everything.
In the beginning I stated 2 things:
I have crunched the numbers as best as I could and this is what we have come up with:
Dampers are 749.
S2Forum members will use 2 promo codes (which are not stackable)
This will get you 250 off the MSRP leaving the balance of 499 (so basically those that paid a deposit will only need to budget for $100) more. I will be providing ARP crankshaft bolts and ekgrip shims at our cost.
http://www.vdamper.com/22-20V-Inline...tion_p_41.html
FORUM: AAN
As usual , if you are not satisfied with the above , send an email to iabed@iabedindustries.com to process your request (refund or what have you)
Hope that answers everyone’s questions and sorry I can’t offer an exact time line on the 3B/7A units.
As mentioned to quite a few of you via email. The image was not supposed to be on the forums. This has caused quite a few concerned members with the usual “where is mine” “when is my turn”
And to that I respectfully answer :
In the order they came in.
I didn’t want to post on the forums/groups until I had all my ducks in a row. I don’t need to iterate how long of a project this has been for us (and all parties involved) and while I do appreciate your patience , understand that this was not our intention.
The goal all along was to have a universal hub that would work right across the board. Unfortunately post making samples it was determined that the 7A/3B/MC units would need a redesign which put a huge disappointment in the project.
We have the ADU & ABY drive rings but a hub that isn’t universal to the 7A and 3B. In the interim considering the AAN was the most important aspect of this project , I decided to fast track (insert joke about fast track and 2.5 years not being in the same sentence) the AAN members first.
Once we have sorted the AAN members , I will move onto the ADU & ABY members and will finish with the 7A & 3B members.
I have spent the better part of the afternoon compiling everything.
In the beginning I stated 2 things:
- Dampers would be in the $450-$550 range
- They would hopefully have a cogged gear incorporated into the design.
I have crunched the numbers as best as I could and this is what we have come up with:
Dampers are 749.
S2Forum members will use 2 promo codes (which are not stackable)
- Aandeposit (Gets you your deposit off)
- Vd100 (Gets you $100 off)
This will get you 250 off the MSRP leaving the balance of 499 (so basically those that paid a deposit will only need to budget for $100) more. I will be providing ARP crankshaft bolts and ekgrip shims at our cost.
http://www.vdamper.com/22-20V-Inline...tion_p_41.html
FORUM: AAN
- S2forumuser – V6Quattro x AAN
- S2forumuser – s0_big x AAN
- S2forumuser – ThatGUY x AAN
- S2forumuser – Jukkis x AAN
- S2forumuser – quattro4sprung - AAN
- S2forumuser – thuppu x AAN
- S2forumuser – Amarider x AAN
As usual , if you are not satisfied with the above , send an email to iabed@iabedindustries.com to process your request (refund or what have you)
Hope that answers everyone’s questions and sorry I can’t offer an exact time line on the 3B/7A units.
Comment