sport quattro replica

[newsh]

Yes, I like this car, makes me want to build one

[campbellWS]

Yeah the article in the mag is awsome!! Quite a big spread. must be a crazy feeling to pick up a mag that you have read for years to find your own build inside!!!! lucky guy!!! ;0

[quattro84]

Great poroject Zlobo! Where did you get your turbo heat shield/jacket from? Looks quite neat.

It's from Design Engineering: http://www.designengineering.com/cat...r/reflect-gold

Edit: and the rest http://www.designengineering.com/products.asp

[AndyP]

Great poroject Zlobo! Where did you get your turbo heat shield/jacket from? Looks quite neat.

Owen Developments sell them in the UK, I have one on mine, works really well.

http://www.owendevelopments.co.uk/products/product-detail.asp?prodId=198&catId=27&subId=-1

[Error404]

I love your cars Zlobo

[zlobo]

Great poroject Zlobo! Where did you get your turbo heat shield/jacket from? Looks quite neat.

tnx,, i found it on ebay its a DEI

[URquattroGus]

Thanks for the help guys, have emailed owen developments. It looks like the one they sell looks different, doesnt have the texture finish that looks quite smart.

[20VgroupB]

WOW! crazy build....love it

[zlobo]

Thnx,

third prise at vallåkra,


here is somting from mantorp when i broke the gearbox in august

http://www.youtube.com/watch?v=Fpz3yimeK4A

had to make an enforsment of the bonnet to make it stronger.


On the saterday i broke my first joint.

maximize and chec it out in the start when the bolt brakes and the joint.

http://www.youtube.com/watch?v=HLy5SEQFZ6M

this weekend i go to the finale in my group and got the first prise in the elimination on Emmaboda motorfestival.

pic of the joint

[S2central.net]

Cant weld that one back together !!!!

[gnutz2]

I've heard the cv joints that use a nut are a lot stronger than the hollow bolt through type but you probably know that .

What 60ft times were you getting when it let go?

[zlobo]

I've heard the cv joints that use a nut are a lot stronger than the hollow bolt through type but you probably know that .

What 60ft times were you getting when it let go?

yes the joint with nut are stronger.. i am going to use the front joints in the rear next year.. i dont remember the 60ft i think when i broke the joint i got 1,8s

Below you can se when the joint broke, the bolt poping..

http://www.youtube.com/watch?v=gs_Rad82eV4

[montauto]

Frinds of mine atempted the same thing(sport quattro conversion) heres what it looked like before and after

[Billman]

looks odd with the flat fenders

[zlobo]

ufff long time since last update...

Since last post I was o kjuladragway the grip was awesome I managed to destroy shafts inner and outer joints.
I managed only to get one run in the qualifying this time I backed up my 10s with 10,85s and 205Km/h and a 60ft 1,59s wit miss fire on all gears.







This is after first run..


this is everything i broke that day.


made a small video clip on the litle i had.

http://www.youtube.com/watch?v=fhXL312tIEo

the lack of free time i started to tear my gearbox that i screwed up on the action meet

here can we se the 5th gear.


centre diff nice and clean.


Removed the turbo, iam rebuilding the em a bit.


biger flange T4 so now i can have biger turbine housing


removing the 5th gear.



the rest remain

många delar blir det


Pepper mill, a litle bad bearings not strange that the gearbox vas noysy from the first day.




Picture on the bad parts.


good to have some shelfs to put the parts on.



not so much left on the gearbox.



Removed the front diff and found another bering that was bad.

Diff parts cleaned.




I also started with the rear diff checked the bearings.
Now i am looking to find a solution how to cool my rear diff, any ideas?


Got the new bearing, heated it up to 125C and got the diff out from the fridge and pused the bearing on by hand.



Removed the em and found out its ben leaking due to high backpressure.



recived the other bearing a while ago,


New bearing mounted.Heated up this bearing to 100C and droped it on its place .


Started to put the gearbox together.





replacing the flange on the em.


nearly there.


only the diff left


finished..


Turbo is back with a bigger turbinhousing.


did some test driving to test out my new gopro.

http://www.youtube.com/watch?v=AyVQsNbwrNs