3b s2 coupe resurrection

[nesshead6]

What exhaust did you get?

[andy10v]

Custom 3" from Roccos old car, top part of 3" downpip from quattronick, 3" downpipe tube only borrowed from martinws (fron DNA/034)

Just need to cut it all up and weld it back together now

[sjw185]

Just getting caught up with your thread now, sounds like you had some day at Knockhill.
Cant view the pictures as they are blocked
Would like to try and get to Knockhill on the 11th Jan was thinking of fitting some track tyres on my RXs.



Cheers

Steve

[andy10v]

It was great fun, cant wait to go again.

I take it you are offshore now?

I think Martin is booked on for Sat 28th of February (track Scotland day), is 11th of January a Knockhill trackday?

I imagine it is going to be pretty cold and wet either day

I am going to get something sticky, A048, AD08, R888 etc, proper slicks seem like they might be a bit much hassle. What tyres are you looking at?

[Error404]

Most track day organisers stipulate a full cage is required if you are running slicks.
Plus they will destroy all your suspension bushes etc real fast. Track day tyres are the best option

[sjw185]

Yea offshore at the moment.
Have not checked out tyres but was not looking for anything too extreme.
Like the idea of having dedicated wheels so I can travel back to Aberdeen and not have to worry about ripping up tyres on track.
My tyres came good after the drive back home but took me a long time to clean my wheels of brake dust and rubber
Got some video of you after passing me for a few laps, couldn't keep up on the straight..........Looking for RS2 turbo now!
Will have to get it uploaded once I get home.

cheers

Steve

[andy10v]

Most track day organisers stipulate a full cage is required if you are running slicks.
Plus they will destroy all your suspension bushes etc real fast. Track day tyres are the best option

Interesting, I did not know that.

Yeah, the suspension is too soft with the current amount of grip, slicks would just bottom it out. Plus brutal on the rest of the car as you say.

Also the engine oil control cant deal with the current grip level, and I know people have problems on slicks with oil pressure.

I am leaning towards A048s just now (with some pikey suspension stiffening).

[andy10v]

Yea offshore at the moment.
Have not checked out tyres but was not looking for anything too extreme.
Like the idea of having dedicated wheels so I can travel back to Aberdeen and not have to worry about ripping up tyres on track.
My tyres came good after the drive back home but took me a long time to clean my wheels of brake dust and rubber
Got some video of you after passing me for a few laps, couldn't keep up on the straight..........Looking for RS2 turbo now!
Will have to get it uploaded once I get home.

cheers

Steve

Yup track wheels/tyres would be nice, I appear to have stuff burnt into my wheels, they are minging.

Video would be great, thanks.

Turbo envy, am am looking at an RS2 billet now

[martinws]

My federal RSRs seemed to do a fair job. I'm in desperate need of stiffer springs for the 90. I run koni adjustables and stock s2 springs. It bottoms out at the bottom of the chicane and has some serious reverse rake even when parked up.

At least if February is wet n cold, your brakes might last longer.

[martinws]

PS. I highly recommend unplugging your n75 for a few laps just for a giggle.

[andy10v]

Your car did look like it was trying to wheelie most of the way up the straight!

Proper brake fluid should hopefully sort the brakes, but yeah no load on them in the wet.

Unplugging the N75 would probably be very good for smoothing me out.

[sjw185]

I think Martin is booked on for Sat 28th of February (track Scotland day), is 11th of January a Knockhill trackday?

I imagine it is going to be pretty cold and wet either day

Seen the 11th mentioned in earlier post?, I'm home around the 28th so will try and get booked.

Got some of this brake fluid for flushing system

http://www.opieoils.co.uk/p-60249-millers-oils-universal-brake-fluid-dot-4.aspx

Got some old progressive springs off the coupe, think they are Koni if you are interested?

[andy10v]

So current winter plans

Fit wagner intake
Fit 3" exhaust
Replace MFTS with VDO sender
remap
cam cover vents/baffles (time for something that welds alloy?)

I am adding to the list

SRE clutch
ABY rack (easier with the box out?)

Might as well drop the front subframe at the same time to alloy bush, replace all wishbones with poly and get an alignment done.

Anything else whilst I am in there?

I am torn on turbos, I can buy Albert's turbo and sell the RS2, so should not cost any money, I will be getting a live map either way and already have bigger injectors.

So do I want 370bhp or 450bhp? (I am concerned the billet k26 with a modified exhaust turbine may not be as nice to drive?) Any opinions from folk that have gone up from RS2 spec?

Also do I go COP so 100% no misfires?

[supersonic112]

Would be keen to know how easy it's to swap a 3b rack for an Aby. Is it a straight swap or do you need other parts on top?

[SteveH]

Would be keen to know how easy it's to swap a 3b rack for an Aby. Is it a straight swap or do you need other parts on top?

It's identical, so a direct fit. With the exception of the servotronic electrical connector.