Terrybullwon's Racing S2 coupe

[AndyP]

Looks great, are you going to put them into production?

[terrybullwon]

Thats the plan Andy.

prototype weighs in just over 200g less than half the stock one

[Error404]

Awesome! I will be interested if you get more done

I thought you had the 200 style Audi Sport rack though mate? :

[andy10v]

Do you think there would be a noticeable difference in feel if you still have rubber bushes?

[terrybullwon]

Awesome! I will be interested if you get more done

I thought you had the 200 style Audi Sport rack though mate? :

Had to sell it, real shame i could not get the LHD rack to work RHD i even welded the chasiss bracket in.

So i went to the 034 motorsports one that as always SpeedingG60 hooked me up with, works nice, alittle stiff but its new. Less than 2.1 turns lock to lock.

Do you think there would be a noticeable difference in feel if you still have rubber bushes?

Dunno hard to say, i could not comment fairly. I can say that when i strap my car into the trailer i could see with the OEM metal bracket twisting when tightening the ratchet straps up

[speeding-g60]

always glad to help out a top notch fellow enthusiast!

[Puglife]

Suppose I should post something up James. Looks good and will get rest of bits to you once machining is finished or as per discussion at BTCC.

There will be a limited initial batch once R&D is complete, having worked at World level Motorsport I know that until its right you dont release as final spec.... Also I'm working to small budgets than teams I've worked for on R&D!

Steering kit will accomodate M12 rod ends with M12-M10 misalignment spacers, these spacers will be readily available from other suppliers to help keep costs down and ease replacements if you need them and I dont have them! Any questions about kit just contact Chef. I'm not advertising these as such on the forum, it will be a limited initial run with scope to then expand as a stocked item.

regards,

Jay

[terrybullwon]

Thanks Jay

[AndyP]

Ballpark cost?

[Mcstiff]

Ballpark cost?

I'd love a pair but quite budget constricted.

[Puglife]

Ballpark cost?

Hi Andy,

Don't take this as retail but I've estimated it to be around the £300-350 inc. VAT figure. That's bracket, new bolts, the custom studs and support/shear plate and misalignment top hats all as a complete kit. Takes M12 rod ends. I may do a road kit variation which would be slightly cheaper and could accommodate rubber bush standard track arms.

Regards,

Jay

[Error404]

I think a road version would be more suitable for most people, accommodating the stock track rod ends.
Post a thread up then Jay, when appropriate

[Mcstiff]

Hi Andy,

Don't take this as retail but I've estimated it to be around the £300-350 inc. VAT figure. That's bracket, new bolts, the custom studs and support/shear plate and misalignment top hats all as a complete kit. Takes M12 rod ends. I may do a road kit variation which would be slightly cheaper and could accommodate rubber bush standard track arms.

Regards,

Jay

I think a road version would be more suitable for most people, accommodating the stock track rod ends.
Post a thread up then Jay, when appropriate

Would go well with some upgraded bushes

[terrybullwon]

Got alittle press from the speed hunters

http://www.speedhunters.com/

Videos to come

[rynaqui]

Been waiting to see videos of this for some time now Chefe