UrS4 2.2T Sedan project

[V6quattro]

Nice. Just enjoy your car now. I'm running a Precision 6262 and at my first dyno session i was making 500hp at the crank with 98oct. Now after some time tweaks and E85 im at 700hp

So just enjoy and improve it now.

[Wrath]

Nice ! That´s something I would like to have in my car when the Engine is ready...

[s0_big]

Today was the day

After a 800km trip which started today at 3am i'am finally home. Everything went wery good. I thought i would get some more power out of it but i'am happy with how the car preformed anyway (my first build). No problems at all. I was told that if i pushed over 2bar it will may be a risk because i ran it on 98oct so i decided to stop at 2 bar. We tried to push it up to 2.3bar and i went good but i decided to play safe and vent down to 2 bar and 378whp (461hp at crank) was highest hp it ran. Unfortunately i forgot to record a video but the tuner recorded the dyno runs so he will upload it later on. Some pics of my day
Power is measured on the wheels!

[sofronieva91]

good luck

[s0_big]

Just waiting on the dyno

Just waiting on the dyno... But it's not that far away anymore

[rxl]

sounds like a beast

[s0_big]

Happy!

So today i put the exhaust back on and some small other things i had to fix (broke my water temp sender connector when i removed the gearbox bolts ) before i could start again. First i checked the trigger signal, all god. Started up the car and now i could rev it without any trigger faults! Took it out in the sun and sat down and just looked at the car with a cold


I'm happy now as it seems to work just fine. First time i drove a sinter disc but i didn't think it was so bad. Love the response with the new flywheel. So for now it's just a loooong waiting to the 28 of April when i will know if i have to cry or celebrate.. Anyway here is a video of a little revving:

https://www.youtube.com/watch?feature=player_detailpage&v=Ruy33Wr1TQM

[hunker7]

That looks like a piece of art.

[s0_big]

New flywheel and clutch disc

Hello! Yesterday i received my new alu-flywheel and clutch disc.






Mounted it to the car today also with a new clutch cylinder because the old one was leaking i think. So tomorrow i will sure know if this works fine with the Maxxecu. I hope so A shame to hide these nice pieces but atleast i know that they are there

[Wrath]

I think they where like 4000SEK new.
Talk to http://www.garaget.org/Udde or http://www.garaget.org/lindholm_82
They work on The company that makes em, they are The makers... They do alot more audi stuff, check out Lindholms garaget site...

[s0_big]

Here you have another flywheel, some chaps in Åre, Sweden that makes em







I think they are cheaper then the one you have posted, looks similair though.

Yeah looks pretty similar! But my thrust is with Leander's clutch. Whats the price on the "Åre made" ?

[Wrath]

Here you have another flywheel, some chaps in Åre, Sweden that makes em







I think they are cheaper then the one you have posted, looks similair though.

[V6quattro]

Very Nice!

[s0_big]

try it with a light wheel





very nice projekt

Thanks! Yeah i will try with a different flywheel! Just put in an order on this gorgeous piece







And this one

[Ficksy Heart]

try it with a light wheel





very nice projekt