1983 UrQuattro

[Macchris]

AWESOME job done !! the project i sooo interesting !
btw which items are you buying to do thisplease :



thanks

Tof

[afterthought]

Can we have some more details on the inlet manifold. Looks a nice piece of kit!

here is a link to the website from the manufacturer:

http://www.bst-turbo.de/home/ansaugbr%C3%BCcken/audi-s2-rs2-s4-200/

[afterthought]

AWESOME job done !! the project i sooo interesting !
btw which items are you buying to do thisplease :



thanks

Tof

Tof. The suspension can be obtained from EFI Express, 2Bennett, Ground Control, or a few other suppliers. Later today when I get time I will try and find all the #'s

Also can put together your own kit using parts from A-1 Racing but I don't think it ends up being cheaper. A-1 RACING
Also I believe 2bennett modifies the struts to fit in the Audi tubes.

To put a kit together you would need:
Koni Struts = P/N 8610-1262 Sport (x4)
Springs = Ground control 200.64.58 (8" x 2.5" ID x 340 LB/IN) (x2), Ground control 200.64.77 (8" x 2.5" ID x 440 LB/IN) (x2)
Adjustable threaded sleeves (x4)
Weld on "perch rings" (x4)
Top Hats = A-1 Racing P/N 12470 (x4)
Upper strut mounts of your choice, I am running these....
Comp Brake Spherical Mounts

[quattro-nick]

that's an expensive intake, 1499 euro
i have to admit it's looking good

[afterthought]

I paid a little less but you're right its expensive an I believe even the Wagner is on par with that or maybe even cheaper. As far as flow numbers I am not sure what the comparison would look like.

[Macchris]

thanks for all the info, sadly i'm other side of the pond so i guess the price would be really expensive,
i search for a solution for typ85 GTQ less than 6/700 for 4 corners but i think i'm dreaming

[afterthought]

thanks for all the info, sadly i'm other side of the pond so i guess the price would be really expensive,
i search for a solution for typ85 GTQ less than 6/700 for 4 corners but i think i'm dreaming

Mine was 453 + shipping without the Koni struts.
You could put together the coils without too much headache as long as you can find a place that sells the threaded sleeves. At one point I even used a set from ebay that was built for a volkswagen , you could probably find the sleeves adjuster rings. Anybody that sells eibach or similar springs could set you up with springs for proablt about $50 a piece.

[Macchris]

thanks ;-)
tof

[afterthought]

Wiring:

One of the next steps on this project is to start getting the wiring started.

For this car I have purchased the VEMS I-6 "Base" Twin Shield Harness and am attempting to do a portion of the wiring myself, both because I'm cheap and because I'm an idiot.
EFI Express supplied me with a pretty sweet set-up, he got me the harness and also all of the pins and connections on the end so I can make these terminations myself and end up with no butt connectors anywhere in the harness. It will make for a real clean setup because it has everything I need and nothing I don't (except one extra injector).

For starters I am laying the harness out and figure which wire is which and label the end so I can make the terminations I need. I'm now trying to acquire data and knowledge about that harness, If anyone has any links to any cool how-to's about understanding the harness and the VEMS computer please feel free to post them here!

http://www.vems.hu/wiki/index.php?page=MembersPage/PhatBob/UserGuide

V3.6 Pinouts : http://www.vemssupport.com/forum/ind...ic,1266.0.html

[quattro-nick]

i use vems plug&play,much easier

[afterthought]

i use vems plug&play,much easier

I know what you mean, I have the PNP ecu for my 4000 but because I already had the AAN harness for that car. The econoseal with this harness when done right will make for a much cleaner set-up and force me to learn how it all works so that way I won't have to rely on others.

[quattro-nick]

so if i am correct you gonna use this vems with a 3b engine harnas in the ur?

[Macchris]

electricity is not my cup of tea too, i'll give this to a shop here who do this for about 400 euros

[80Comp]

Nice and good progress on the old girl
Any rust issues?

[bob321]

I have same standalone setup with VEMS (EC18 & 36), but I decided to go with VW Polo/Lupo 60-2 flywheel trigger(HALL), instead of Auditrigger. Appearently there have been issues with Vems and Auditrigger.