Paul's ABY Home Fries

[AUDIS2avant]

hi paul. you got a pm.
Have tried today getting the ecu out, but it cannot get past the white plastic clips and a mounting bracket for the fan ventilation i think it is

[S2central.net]

I didn't get a fresh PM from you... Strange. This problem is normal if the ECU has never been out before. Some patience and a strong back is required.

That white bracket twists off.

You generally need to remove the aircon drain pipe as well for improved access.

Lever off the 55-pin ECU connector carefully to give you clearance.

Then lever up the big spring clip and pull the ECU downwards from its location - there is another clip up at the top which is gripping the ECU, but with strength, dexterity and care you can pull it down.

The thing I also fight with is where a corner of the ECU snags the carpet on the way down and it gets jammed... Sometimes you need to trim the carpet a little bit.

[AUDIS2avant]

Thanx paul

Got it out now, but found out that the u-bent is broken off the ecu where the connector goes in, so have to fix that also
Lots and LOTS of smal stuff to fix

[S2central.net]

Thats a PITA - seen that once or twice but never done it myself... If you get creative with cable ties you can effect a temporary fix.

[quattro20v]

You have new PM. BTW how many pm's you get in a day.

[karlblues2]

Homefries down under

Hi Paul
Sent a pm to you last week regarding a homefry for a stock 1995 S2 ABY down under. Can you check your inbox and let us know if you can accomodate?
Cheers
Karl
Oz

[max_s2]

Is it possible to get chips alone?
I can chiptune my selef, so no need to send ECU to you.
And how much it will cost?

Is there also available a chip for an 3B engine?