Those who run LPG converted 2.2's

[hunker7]

Do I have the right idea here? Also, what is that nipple circled with red? Nothing comes with diagrams which is quite annoying.


EDIT!

This probably how it should be, no copper tube

[kibby]

Re: lpg

The nipple is for vacuum

[hunker7]

The nipple is for vacuum

So that just connects to manifold?

[diesel des]

So that just connects to manifold?

Yes and yes. You have it sorted.

Sent from my LG-H955 using Tapatalk

[diesel des]

Do I have the right idea here? Also, what is that nipple circled with red? Nothing comes with diagrams which is quite annoying.


EDIT!

This probably how it should be, no copper tube

Oh remember the vacuum nipple needs connected to the intake manifold after the throttle. Put a t on that hose and run the third part of the t to the sensor for intake pressure.

Also the heat pipes need t'd into the hoses going to the heater matrix. Don't connect in series. I think you need 2 water t pieces that are 20mm on the through side of the t and 16mm for the vaporusor. But check. Also worth getting them in brass or copper. I don't like the plastic ones.

Sent from my LG-H955 using Tapatalk

[hunker7]

Thanks Des! Looking at ECU diagram it mentions reducer temperature gauge, where does that live?

[diesel des]

There should be a sensor on your vapourisor or at least a pocket for it to go into? Or maybe now it's a separate sensor that the water flows through?

Sent from my LG-H955 using Tapatalk

[hunker7]

I'll have a look, it's like a injector nozzle sized sized thing with thread. What is the black box on filter?

[diesel des]

That's the gas solenoid. You will have another one similar that goes at the gas tank end.

Yea I think the vapourisor has an insert or a place for the water temperature sensor. Unless they have changed. Ask your supplier. I have an old kme gold I will look at tomorrow and picture what I mean.

Sent from my LG-H955 using Tapatalk

[hunker7]

Only place I can think of is on the other side where the +/- screw is, just on the opposite side of the reducer.

[diesel des]

Will get a look tomorrow for you.

Sent from my LG-H955 using Tapatalk

[hunker7]

Thanks mate.

[diesel des]

Here are some pictures of a old one gold. Note the nipple\ thermo pocket for a temp sensor.





Sent from my LG-H955 using Tapatalk

[hunker7]

Thanks, I don't have that nipple between coolant tubes. Only thing I have is the screw?

[diesel des]

I could send you this screw/nipple but you need the small sensor to which I don't have. Contact your supplier and ask them if they carry those parts. They could be a separate pipe with a sensor in it now?

Sent from my LG-H955 using Tapatalk