Intake manifold porsche inscription

[willg54]

the Sport part is the new audi font but the Audi was was drawn by Shane (s2_wot)

ill see if i can find the other font but my previous search was unsuccessful

[Audi-Porsche Avant RS2]

Hello friends, I hope that you understand my dimensions:

Total inscription internal length: 30.8 cm

Total inscription external length: 31.8 cm

Total inscription internal height: 3.1 cm

Total inscription external height: 3.8 cm

Porsche inscription 1.4 cm every letter height

Porsche inscription 2.5 cm every letter length

Total lenght Porsche inscription 20 cm

Powered by total length 7.4 cm

Powered by every letter height between 0.5 cm and 0.7 cm, depend on which letter

Distance between Powered and by 0.5 cm

Distance between by and Porsche 1.5 cm

Distance between Porsche inscription and inscription outer edges of the plate 1 cm all around Porsche inscription

Distance between Powered by inscription and top outer edges of the plate 1.5 cm

Distance between Powered by inscription and bottom outer edges of the plate 1 cm

Bye

Alessio

[willg54]

thanks Alessio!

Is the sport people after the very square boxy lettering??

[s2_wot]

Will i think the sport in this is what seems to be most liked, I'm not sure how right it looks with the old Audi font. But that old font is in keeping with the font of the time so I think that's the best for the application.

here

I'll have one whichever way you go


Edit:

Another example

[willg54]

thats what ive been finding. i think i prefer it but was open to opinions!

im still pushing on with the current design, hopefully tomorrow could be prototype day!

[s2_wot]

Will, take a look at post 75 in this thread, the "powered by" seems to be all in lower case. Any idea if that's the original?

[Nuvo]

@s2_wot, see post #235 .

[willg54]

i had gone with all lowercase in the coding for the prototype, will have to see how it looks when its done. as for being original, im not sure! doing a quick google seems to suggest thats right

[s2_wot]

@s2_wot, see post #235 .

I'm not 100% following every post so I was just commenting on the earlier pic by Will. All good.

[Nuvo]

No worries.

[newsh]

From my coupe thread

[bikerjim]

Just a couple ideas

[willg54]

just so you know im still working on it! simulations didnt show a great finish to the lettering so trying a new method of machining.

update soon!

[willg54]

:UPDATE!!!

Machine code is written and looks much much better! now just to wait for a free slot on the machine and were off!

[als2]

Yippeeeee more power to u buddy!

AL