H&R's for Coupe

[S2 Ant]

Jonas, ppl fit fronts all round on the Coupe over here, has been tried and tested

[Jonas_R]

Jonas, ppl fit fronts all round on the Coupe over here, has been tried and tested

Yeah sure what i meant was that, you can still have them front / rear.

[Greg_S]

from what i remember they go on with the closer coils at the top, but I think they only fit on one way.

have you got koni shocks in yours?

what setting are you going for?

Greg

[martinjs]

yeah, have koni springs + shocks but wanted a drop of 40mm so thought i'd swap to h&r's whilst im fitting tims top mounts.
The shocks are about 2 years old and were set at 1.5 turns, i might go anonter 1/4 turn though, because the car pitches a bit under braking now.

but im wondering if the car will sit level with these front h&r springs on the rear though, due to more weight at the front.

[Greg_S]

every lowered coupe ive seen seems to sit very slightly higher at the back. Have you set them 1.5 turns from fully soft front and rear? goto do mine soon too, adjust them that is but cant remember which way is soft or hard.

Greg

[91_S2]

Martinjs: Sorry to say this but, it is not true that you use front all the way around on the coupe. If yoou buy them from germany you get at rear / front set of springs.

/Jonas R.

It is not true in Sweden either. This seems to be a strictly UK phenomenon.

[newsh]

Anticlockwise is full soft, I've got 1 turn in on the front and 1 or 1,1/2 on the back and the back is a little hard, I will prolly back it off to 1/2 a turn on the back as recommended by Wab The King I think.

[Erikb]

Can someone post the direct link to the H&R bilstein kit, I cant find the kit on reineke.de

thanks,

Erik

Is someone familiar with this set for the coupe:

koni set

[sal_s2]

every lowered coupe ive seen seems to sit very slightly higher at the back. Have you set them 1.5 turns from fully soft front and rear? goto do mine soon too, adjust them that is but cant remember which way is soft or hard.

Greg

Mine is fitted with h/r springs. The rear is slightly lower than the front.

[Greg_S]

Erik, I thought they had stopped making this kit a few years ago.

Greg

[Erikb]

Do you mean the kit with the koni shocks or with the bilstein shocks.

[Greg_S]

with the koni shocks

[Erikb]

Yep, i know that the koni set, koni shock + springs not available anymore. but i am looking for the H&R bilstein kit. I cant find this on the site of reineke. So if someone has the link please post it, I want to order it at the end of the year.

thanks,

Eri

[Jonas_R]

Yep, i know that the koni set, koni shock + springs not available anymore. but i am looking for the H&R bilstein kit. I cant find this on the site of reineke. So if someone has the link please post it, I want to order it at the end of the year.

thanks,

Eri

Simply call or email www.reinekeshop.de, they have it just not on there page. the price is 710 euro plus shipping. I bought from them and there where no problem shipping from germany to denmark. Price was 22 euro. Just remember you have to meassure weather the front axle is M50 or M55, for my 1992 s2 coupe it was M55, check this link one of the last post:

http://www.s2forum.com/forum/showthread.php?t=4969

29939-1 Audi Coupé Quattro ("S2") Typ 89 Q
VA:30, HA:30, 29939VA1, 29939HA1, VA: M50 x 1, 5
Hinweise: 22 Gutachten

29939-2 Audi Coupé Quattro ("S2") Typ 89 Q
VA:30, HA:30, 29939VA1, 29939HA1, VA: M55 x 1, 5
Hinweise: 22


Call or email them at:

info@reinekeshop.de

+49 451 4 86 87 88

/Jonas R.

[Jonas_R]

Ohh and the lowering is 50/50 front / rear and it has bilstein sprint dampers.

/Jonas R.