Announcement

Collapse
No announcement yet.

Propshaft Overhaul

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Just resurrecting the thread.. I need to find a u joint for my audi s2 aby 6spd propshaft.. im located in usa.. can anyone help me find one??

    Comment


    • For the others doing this, I ordered this one, and it fits great:

      https://www.ebay.co.uk/itm/114262224447

      Here's a screenshot of the details, including the size measurements, which I found handy:

      Screenshot 2020-09-20 at 13.35.12.jpg

      Comment


      • I measure the u joint and the caps diameter is 24mm... where can I get a new joint?? Mines was crimped into place...

        Comment


        • This was the one I used:

          https://www.ebay.co.uk/itm/114148117175

          Denoted as: 26 x 69.8 Propshaft Universal Joint Fits Mercedes / Audi - NEW

          Though mine was held by circlips.

          If you are sure of your dimensions, you can search just by them on ebay and find stuff. e.g. https://www.ebay.co.uk/itm/HARD-CAP-...IAAOSwjv5eoCek

          (not likely to be the right other dimension!)

          Comment


          • I'm just about to get my propshaft shortened and balanced. Has anyone tried these CV's - https://www.ebay.co.uk/itm/New-Genui....c100752.m1982

            They look correct for the job.
            91 Modded 3B
            14 A6 Avant Black Edition

            Comment


            • Got the right boot for the prop so thats a good start too!
              sigpic

              1992 3b S2 Coupe

              Comment


              • I bought a new support bearing too. The Febi item I have on the prop is nowhere near as solid as the replacement.
                91 Modded 3B
                14 A6 Avant Black Edition

                Comment


                • Which did you go for? Yeah that febi one was always pretty flimsy
                  sigpic

                  1992 3b S2 Coupe

                  Comment


                  • Originally posted by s2driveruk View Post
                    Which did you go for? Yeah that febi one was always pretty flimsy
                    https://www.driveshaftparts.co.uk/in...roduct_id=1751
                    91 Modded 3B
                    14 A6 Avant Black Edition

                    Comment


                    • Yep, i have the same, its nicely substantial
                      sigpic

                      1992 3b S2 Coupe

                      Comment


                      • I've just arranged to send my propshaft to Bailey Morris in St Neots to be chopped and balanced. Chards in Bristol have some poor reviews and the guy wasn't helpful on the phone.
                        91 Modded 3B
                        14 A6 Avant Black Edition

                        Comment


                        • Sorry to bring up a old thread. I know Lobro 301142 are the CV’s I need but is there a kit with the boots included available ? Rather than buy the GKN ones separately.

                          cheers
                          Adam

                          Comment


                          • I looked, but bought separate in the end.

                            Comment


                            • Propshaft cv joints, bearing and uj all ordered, shaft split down so its all now ready to go on but, noticed the boots are past their best and each have a small hole ​​​​​​
                              I see the GKN 'aero cv boot' looks suitable as it has the correct dia, hole pcd and overall shape but... Says it is for a 22mm shaft. Measuring my prop shows it is 26mm. Q For those swapped their boots; will the gkn rubber stretch 4mm?

                              Seems a lot...

                              Comment


                              • I used these exact boots, all fine, note dimensions stated in the subtitle:

                                https://www.ebay.co.uk/itm/372564892590

                                Screenshot 2021-06-15 at 10.15.18.jpg

                                Comment

                                Working...
                                X