Which upper bolt....?
Announcement
Collapse
No announcement yet.
New S2 Avant Nothelle N300 owner
Collapse
X
-
Originally posted by Error404 View PostThat is a detent. Why has it been drilled?
There may be room to remove & replace in situNothelle S2 Avant
Black Ur project
Ocianic Ur project gone
S2 Coupe project gone
Urs6 plus project gone
Comment
-
Originally posted by Error404 View PostIt might work, but better to replace it - doubt its an expensive part and should be easy enough to swap out if you have access.Nothelle S2 Avant
Black Ur project
Ocianic Ur project gone
S2 Coupe project gone
Urs6 plus project gone
Comment
-
Originally posted by Error404 View PostThe detent is a spring loaded plunger that gives the positive location on the shifter rods when you select gearsNothelle S2 Avant
Black Ur project
Ocianic Ur project gone
S2 Coupe project gone
Urs6 plus project gone
Comment
-
Investigating rich running.
Did a leak test (thanks Newsh).
Nothing major found.
Don’t much like this
Some kind of aftermarket boost device.
It was set on max. Took it all out and have gone back OE with new pipes.
Also cleaned and tested this little valve. All seems good.
Tested my after run pump and it’s definitely working. Also comes on when you first switch the ignition.
I have another oil pressure sensor to try (thanks Trist) but how the hell do you get at it to remove? I’ve bent an old 17mm spanner but still no luck.
Sent from my iPhone using TapatalkNothelle S2 Avant
Black Ur project
Ocianic Ur project gone
S2 Coupe project gone
Urs6 plus project gone
Comment
Comment