Quite right! It was the bargain of the year
Announcement
Collapse
No announcement yet.
New S2 Avant Nothelle N300 owner
Collapse
X
-
As I do not have a Tig welder, popped over to see my mate. A small section of the Milltek had been cut off as they apparently could not get the joint apart.
I need to learn this skill.
I can’t wait to hear that lovely 5 pot warble.
Sent from my iPhone using TapatalkNothelle S2 Avant
Black Ur project
Ocianic Ur project gone
S2 Coupe project gone
Urs6 plus project gone
Comment
-
Originally posted by simons2 View PostLooked lovely in the flesh , I was parked on the same row but very near the end , unfortunately wasn’t able to put a name to the face ?Nothelle S2 Avant
Black Ur project
Ocianic Ur project gone
S2 Coupe project gone
Urs6 plus project gone
Comment
-
Originally posted by Bowie69 View PostMan there's so much more room under an avant compared to a coupe!
It was quite easy to fit but it's slightly too long at the moment. I need to check all the joins are fully home.Nothelle S2 Avant
Black Ur project
Ocianic Ur project gone
S2 Coupe project gone
Urs6 plus project gone
Comment
-
Originally posted by Tractor Dave View Post
Yes!
It was quite easy to fit but it's slightly too long at the moment. I need to check all the joins are fully home.
I used a ratchet strap to pull the centre joint together, get some tension on it then bang it with a rubber mallet.
Comment
-
I didn't need the ratchet strap. I had to cut the bolts off the joint clips at the front. A quick spray of wd40 and it moved forward in the joints another 2 inch. Perfect fit now. It must have hung out a lot on it's previous carNothelle S2 Avant
Black Ur project
Ocianic Ur project gone
S2 Coupe project gone
Urs6 plus project gone
Comment
-
Just measured mine. Now 2” proud of bumper. Before adjustment it would have been 4”!
I will be listening my old exhaust for sale if anyone is interested. It’s in very good rust free condition.
Sent from my iPhone using TapatalkNothelle S2 Avant
Black Ur project
Ocianic Ur project gone
S2 Coupe project gone
Urs6 plus project gone
Comment
Comment