Thanks!
Just came back from workshop where I did oil change.
@voursch sprung dirch - if you need any help, post here or write me a message
@macspring - rim are from D2 A8. 5x112 R17 8J ET48 forged and polished. I borrowed this one from friend for test fit if everything works and most likely will go for set of these. TT rims, called "Fat fives" has bit more square shape spokes. They are my second option as well as R18 A8 sport.
Door lights. I took both lamps and complete wiring from C5 A6 doors. It also contains LED for pull trigger illumination. There's enough space at the bottom so no metal cutting needed. For red one there's two options - cut door metal or cut light itself, use LEDs instead of bulb and glue it to doorcard. I went second way.
These will be going to rear doors. These lamps also can be used for rear footwell illumination by installing them at the back of front seats as it is in C5.
@nimo781 - I'd say it wasn't hard, just some imagination and creativity to glue around corners. Biggest problem is top corner of A pillar because of its angle. I'm not a professional retrimmer or anything like that, but I did it at first try so no space engineering involved here. You can try using just a regular cloth and will see if you can do it or better give it to someone else
And most recent picture from today
Just came back from workshop where I did oil change.
@voursch sprung dirch - if you need any help, post here or write me a message
@macspring - rim are from D2 A8. 5x112 R17 8J ET48 forged and polished. I borrowed this one from friend for test fit if everything works and most likely will go for set of these. TT rims, called "Fat fives" has bit more square shape spokes. They are my second option as well as R18 A8 sport.
Door lights. I took both lamps and complete wiring from C5 A6 doors. It also contains LED for pull trigger illumination. There's enough space at the bottom so no metal cutting needed. For red one there's two options - cut door metal or cut light itself, use LEDs instead of bulb and glue it to doorcard. I went second way.
These will be going to rear doors. These lamps also can be used for rear footwell illumination by installing them at the back of front seats as it is in C5.
@nimo781 - I'd say it wasn't hard, just some imagination and creativity to glue around corners. Biggest problem is top corner of A pillar because of its angle. I'm not a professional retrimmer or anything like that, but I did it at first try so no space engineering involved here. You can try using just a regular cloth and will see if you can do it or better give it to someone else
And most recent picture from today
Comment