Audi RS2 -94 Swe

[s0_big]

They look great along with all you have done in this thread. Superb attention to detail!

Liking "Mr Cat" too, how old is he? Ours is 13 next month.

Thanks! Im trying to do my best
The cat, Santino is about 4 years now. Recently we got him a female friend to play with. Was a little bit lonely for him to be alone.

[Vorsprung durch Technik]

They look great along with all you have done in this thread. Superb attention to detail!

Liking "Mr Cat" too, how old is he? Ours is 13 next month.

[SteveH]

Lovely. Great job by the look of them

[s0_big]

Picked up the four remaining rims/tires today. Job well done i think. Couldn't do it better myself
Refurbished wheels and new tires. Tire choice was, Pirelli P-Zero 225/45-ZR. Painted in colour: 61M

image_77219.jpg image_77220.jpg

[s0_big]

I think Dave means the thinner middle ones have peel off double sided tape. You Andre mean the small ones at the bottom of the arches dont you?

Ahh. Yeah I ment the lower trim end pieces front/rear. The ones in the middle of the door I think I will use double side tape.

[fish]

I think Dave means the thinner middle ones have peel off double sided tape. You Andre mean the small ones at the bottom of the arches dont you?

[Tractor Dave]

He is a good boy
Yeah, ok. Well, easiest way would be to just remove the ones on the car to have a look. But it is sure the same as on the S2.

Probably right. Mine were from Audi Tradition. Genuine parts.

[s0_big]

Nice cat
On my S2 Avant, the small ones had a peal off strip with double sided tape underneath.

He is a good boy
Yeah, ok. Well, easiest way would be to just remove the ones on the car to have a look. But it is sure the same as on the S2.

[Tractor Dave]

Nice cat
On my S2 Avant, the small ones had a peal off strip with double sided tape underneath.

[s0_big]

The car is missing the middle door trims and i have finally found them all (they were a pain to get hold of). They seem to have been mounted with some kind of glue. So now im wondering if thats how they should be mounted? I had a thought of double sided mounting tape. Any one know what they used for factory mounting for the middle door trim?
The lower one's is on the car but they have seen better days. They will be changed for new ones. Looking at the front/rear lower door trims, how are they mounted to the car? The trims on the door slides on guides, but there is nothing like that on the front/rear small pieces. Maybe some one have pictures of that or can explain?

Mr cat does the quality check:

45764-6c590dfa3419d98be1dd09f81c782796.jpg

[jbrentd]

Looks great! I was going to search for pictures of those parts, since I recently found an S2 airbox for my project. Not sure they would do me any good though, since the one I bought has had the swiss cheese treatment.

[s0_big]

What a lovely engine bay you have. It's like new

Thanks. There is some hours behind it. But it can for sure be better, but i have owned it for just about 17 month's. So hopefully there is many moore month's to spend on it getting better and better

[Tractor Dave]

What a lovely engine bay you have. It's like new

[SteveH]

[s0_big]

Hello! Today i had in mind to put the air ducts to the airfilter on the car. The car didn't have any parts of the air duct to the filter housing for some reason, so that had to be fixed. Thought it would be a quick and nice Sunday work
It took a little longer time then expected and lots moore parts needed to come of than i thought. After a few hours i got it assembled and im happy.
Lots of brittle plastic parts vs old car is not my cup of tee... Anyway here is some pictures of the parts installed:
45764-0ec481c06d408bd77aac4c41df1c89b5.jpg 45764-b64d0ea443b78915d3b935e36002b4a1.jpg 45764-aa074764a6ecfd33ea839e3dd218fa6e.jpg 45764-3a9b58d4fa308ab5b81defe275d80e3a.jpg