really enjoying the thread too, I'm really impressed with the pace of work you are getting down to a high quality.
Announcement
Collapse
No announcement yet.
A little something to keep me busy
Collapse
X
-
So the handbrake cable springs turned up. Thanks Highland Quattro.
They were fitted which meant I could fit the prop shaft. Plenty of thread lock here. I don't want these coming loose!
Then the heat shields went back. And then the rear and middle box of the exhaust.
After a lot of head scratching, I've concluded that there is no way to get the S2 cats to work. So I'm looking at sports cats and a little welding.
Can anyone recommend a good one?
I will put two in, one each side as per the originals.
Sent from my iPhone using TapatalkNothelle S2 Avant
Black Ur project
Ocianic Ur project gone
S2 Coupe project gone
Urs6 plus project gone
- 1 like
Comment
-
This thread is epic Dave, hell you've put some work into this car!
Regarding the Cat's, they're worth a lot as scrap, more than enough to cover the cost of a pair of nice new sports Cat's, though obviously they could be of use to an S2 owner so it seems a pity to weigh them in, however you may get more for them going down that route.
I scrapped the pair off my V6 C4 Avant as one was partly blocked and it was a quick £500. I haven't made my mind up what brand I'm going to replace them with so will be keeping an eye on what you go for. There are some very cheap ones on eBay though I think these are probably best avoided,1989 B3 2.0 3A 80 quattro... Budget 1.8T Project.
1992 C4 100 2.8 Avant quattro... Mobile Sitting Room.
1995 RS2... MTM K26/7 380 BHP Conversion.
1990 Corrado G60... Breaking For Parts.
Comment
-
Thanks Kit. Yes, it's been quite a long slog. Nearly there now.
I did some searching on the forum and Magnaflow have been recommended previously. My mate has offered to come over with his tig so we are looking good.Nothelle S2 Avant
Black Ur project
Ocianic Ur project gone
S2 Coupe project gone
Urs6 plus project gone
Comment
-
I have a pair of cats. They aren’t going back on mine ever. I’ll dig them out.Rob..
94 RS2 Noggy,LHD,MTM map,18"cup 1s,245/35/18,Bilsteins,RS2 H&Rs,Cup splitter.
87 UR 20v ABY
97 S6 Avant
96 A6 C4 2.5 TDI quattro avant,Ming,Wietec/eibach,chipped
1967 Ford Mustang,Eleanor,460ci v8
Comment
-
You do not have permission to view this gallery.
This gallery has 1 photos.Rob..
94 RS2 Noggy,LHD,MTM map,18"cup 1s,245/35/18,Bilsteins,RS2 H&Rs,Cup splitter.
87 UR 20v ABY
97 S6 Avant
96 A6 C4 2.5 TDI quattro avant,Ming,Wietec/eibach,chipped
1967 Ford Mustang,Eleanor,460ci v8
Comment
-
You do not have permission to view this gallery.
This gallery has 1 photos.Rob..
94 RS2 Noggy,LHD,MTM map,18"cup 1s,245/35/18,Bilsteins,RS2 H&Rs,Cup splitter.
87 UR 20v ABY
97 S6 Avant
96 A6 C4 2.5 TDI quattro avant,Ming,Wietec/eibach,chipped
1967 Ford Mustang,Eleanor,460ci v8
Comment
-
I put some coolant system cleaner in.
And four gallons of super unleaded.
Won't be long now until I turn the key for the first time.
Collected the wings from the
Painter. They look very nice.
Sent from my iPhone using TapatalkNothelle S2 Avant
Black Ur project
Ocianic Ur project gone
S2 Coupe project gone
Urs6 plus project gone
- 1 like
Comment
-
Fixed the seized rear wiper and ordered some new wiper blades.
Hoovered out the scuttle.
The drain holes were full of rubbish.
I wonder what the blue wire is for? It's been cut into the live on the alternator and disappears into the dash???
Sent from my iPhone using TapatalkNothelle S2 Avant
Black Ur project
Ocianic Ur project gone
S2 Coupe project gone
Urs6 plus project gone
- 1 like
Comment
-
Those wings look great, whats the colour match like? From the little bit of the door I can see it looks spot on…
Rob having those Cat’s is a result as well.1989 B3 2.0 3A 80 quattro... Budget 1.8T Project.
1992 C4 100 2.8 Avant quattro... Mobile Sitting Room.
1995 RS2... MTM K26/7 380 BHP Conversion.
1990 Corrado G60... Breaking For Parts.
- 1 like
Comment
Comment