SWB Quattro Project

[UR ANT]

I know i always say this but this is simply an awesome car

[G60Rallye]

Fab work looks very nice & neat, are you a fabricator by trade? Car looks & sounds amazing fella, you've done an amazing job. Looking forward to the power runs on the dyno, please take some video

One question, how are you finding the Tilton pedal box without servo assistance? I would be very interested in knowing which master cylinders you have compared to the total piston area of your front & rear calipers if its not too much to ask, I have the same one for my A4 quattro sport and haven't got round to plumbing it in yet.

I am not a fabricator no. I will get some videos of the dyno dont worry!

The tilton pedal box is excellent. It has an edjustable pedal ratio which means it isn't rock hard to push unlike the compbrake one. I am running .625 on the front and .7 on the rear for master cylinders.

Hope that helps?

A couple of pictures have poped up on the speedhunters website from Prescott.

[Twenny Benson]

I am not a fabricator no. I will get some videos of the dyno dont worry!

The tilton pedal box is excellent. It has an edjustable pedal ratio which means it isn't rock hard to push unlike the compbrake one. I am running .625 on the front and .7 on the rear for master cylinders.

Hope that helps?

Thanks for the reply, that certainly helps. I plumped for 17.8mm (0.7") front & 20.6mm (0.81") rear so not to dissimilar, although caliper piston sizes obviously matter, shouldn't be too far off for a starting point. Considering your not a fabricator you have some awesome TIG ability there mate, well played

Speedhunter images aren't bad either

Once again, cracking effort and what a result

[Bmdub]

Amazing build, such great attention to detail. I saw this car at gti international and have been trying to track it down.

Iam currently building an m3 as a track/show car similar to yours, the shell has been fabricated, and painted however the paint Job is terrible, cage is covered in runs and there is dirt in the paint inside So Iam going to have to get it redone.

So basically I was just wondering who painted yours as it looked amazing when I saw it, and clearly whoever painted it knows how to paint a car with a cage in.

[TimE-J]

The speedhunter photos look amazing, this car really is a work of art!

[Le S2 Audi]

The speedhunter photos look amazing, this car really is a work of art!

I run out of words every time I look at this thread.... Just Stunning...

[G60Rallye]

Amazing build, such great attention to detail. I saw this car at gti international and have been trying to track it down.

Iam currently building an m3 as a track/show car similar to yours, the shell has been fabricated, and painted however the paint Job is terrible, cage is covered in runs and there is dirt in the paint inside So Iam going to have to get it redone.

So basically I was just wondering who painted yours as it looked amazing when I saw it, and clearly whoever painted it knows how to paint a car with a cage in.

Glad you like the build! There are runs in my paint, cages are a ****** to paint. The fella doing mine hated it and said he didn't want to do another cage!

Was back on the dyno again today at TEG Sport in Carnforth to finish off the mapping. We had a few issues with the dyno which meant no print out. Working out the injector duty cycle its making 700bhp at 2.2 bar boost on VP import race fuel. Big thanks to Dave Rowe for all the mapping and twisting both rear shafts through 90 degrees!

[terrybullwon]

Hehe good work Hamish

[SteveH]

Wow, time to get some stronger shafts!! Or would you rather break a shaft than something else??

[G60Rallye]

Its a bit false really. Had to run the car rear wheel drive again becuase the wheel base is too short for the rollers to close up enough. So they have had all 700bhp through them!

[martinws]

Still amazed every time i look at this thread. Well done bending the drive shafts!!haha Will you replace them or wait and see if they twist more with 4WD?

[G60Rallye]

I am swapping onto full S2 running gear over winter. I want to use it a bit at the end of this year so need to think what to do. If it didn't have the line on there you would never know! I wouldn't want one to break it could do a bit of damage flailing around!

[Big Lee M]

I saw Hamish today at his house and the car is beyond unreal, it's just amazing to see it in the flesh. I'm meeting up tomorrow with him and a few friends at edition38 show so should be good weekend. Like everyone has said here its a credit to the lad and if you'd a seen his Golf Rallye before hand you'd a known it would have turned out like this. Just enjoy it now mate.

[G60Rallye]

Had the car down at the Edition 38 show this weekend. Car seemed to go down well! Managed to pick up 3 trophies. 2nd in the Audi class, Best engineering, and PVW sponsors choice.

http://www.youtube.com/watch?v=RbMHkruMeAA

[quattrostyle]

Great results!