Project: RS2 ABY

[Ross]

Damn you Will!! I might have a turbo swap and remap to make because of this....

[Lloyd]

We really need to get some of these K26/27 variants onto the dyno.

[Rocco]

Congratulations Andy

[newsh]

Nice one matey!

[Rusty]

So is this a different turbo the original hybrid you got off Richard?

[Sonic]

We really need to get some of these K26/27 variants onto the dyno.

I was considering renting the MRC dyno for a couple of hours to get my map finalised, which would obviously allow me to do some runs and get some figures at the same time.

Might be worth trying to arrange something on the same date? Their dyno is £88/hour +VAT.

So is this a different turbo the original hybrid you got off Richard?

Yes, will post up spec's when will sends them over.

The plan was always to use the one i had from Richard, but it sustained damage along with everything else and he didn't have any new centre-housings immediately available, although i intend to get one when they are in order to have that turbo as-new again... the damn thing only did 1000 miles!!

[Rusty]

If you're anywhere near Castle Combe then you could hire the 4wd Dastek RR there for considerably less. Just a thought for you.

[Sonic]

Cheers. The remap will be near St. Albans.. even MRC/Banbury is too far away really!

[Lloyd]

I was considering renting the MRC dyno for a couple of hours to get my map finalised, which would obviously allow me to do some runs and get some figures at the same time.

Might be worth trying to arrange something on the same date? Their dyno is £88/hour +VAT.

Yeah, I would be up for that.

Other local option to me is the hub dyno at Torque Developments International http://www.tdi-plc.com/ we could also hire out their dyno.

[Greg_S]

Great news you are back on the road again

[JP]

There is a 4wd dyno dynamics in Sundon Park Luton. And a lot cheaper than 88+vat per hr infact less than half price iirc.

[Sonic]

There is a 4wd dyno dynamics in Sundon Park Luton. And a lot cheaper than 88+vat per hr infact less than half price iirc.

Great thanks, i shall enquire. I assume http://www.evolveautomotive.com/hq-location-contact.php

[Sonic]

A bit of throttle reversing the car in the multi-story this morning ended in hilarity with a whole row of car alarms going off

[Jamo]

Haha Sonic will get an ASBO

[Sonic]

Turbo specs:

comp inducer 54.8mm
comp exducer 76.0mm
comp hsg inlet 70mm
turbine hsg 8cm2
turbine wheel exducer 54.4mm
360 degree thrust bearing