UrS6 Saloon restoration

[Harvester]

I love this precise and clean work .

[Wrath]

Thanks mate, I believe when I'm done with my car I have to buy a giant incubator to store it in... and if I drive it I have to park miles from nearest car park so I don´t get any dents or door marks.

[Wrath]

Got my calipers today and some other stuff I have painted, all the other stuff is in the garage except the caliper thue to rebuild at home, only got pictures of these but here we go:

High temp stickers under a powder clear coat layer, no problem to bake them in oven of 190 degree Celsius. Super quality as always by TJB Pulverlack (PowderCoating) (Sweden, Holmsund)



A overlook of both calipers:



a picture of my homemade piston plug kit. The rings have a sleeve on them to prevent powder also inside the piston hole or how to explain. Works really great



Will not be able to do anything to the car this weekend as I'm hired of my brother to fix some rooms and window changes in his house... Carpenter time

[Vorsprung durch Technik]

Stunning work there wrath. Have fun with the room and window changes.

[Wrath]

Don´t thank me, thank Thomas at TJB Pulverlack, they are mindblowing with their powdercoating, they even do pearl and chrome colors, and I have been a carpainter and you can´t see any different on their product vs 2k car paint , even the effect ones... I just deliver the stuff hehe

[Vorsprung durch Technik]

No,...i agree its your mates work but didn't you sand them down so he could lay a mirror finish on them?

[Wrath]

True a little cred is mine I guess but thats very little...

[urS6Tom]

[QUOTE=Wrath;635111]
Chassie that ive bought:



/QUOTE]

I need one of these! I've got a 1995 A6 Avant 2.6 V6 to strip - will the chassis parts be the same as the S6?

Cheers,
Tom

[Vorsprung durch Technik]

[QUOTE=urS6Tom;770730]

Chassie that ive bought:



/QUOTE]

I need one of these! I've got a 1995 A6 Avant 2.6 V6 to strip - will the chassis parts be the same as the S6?

Cheers,
Tom

Hi Tom, i asked this same question as i have 2.8 ack 30v c4 avant and URS4BOY replied there is very little that is the same.

[urS6Tom]

[QUOTE=voursch sprung dirch;770731]

Hi Tom, i asked this same question as i have 2.8 ack 30v c4 avant and URS4BOY replied there is very little that is the same.

Hmmm. I'm surprised - they must have something in common! Do you have a link to that thread?

[Vorsprung durch Technik]

[QUOTE=urS6Tom;770732]

Hmmm. I'm surprised - they must have something in common! Do you have a link to that thread?

http://www.s2forum.com/forum/showthread.php?t=69216

I was surprised that very little is same,but there you go...bit of a shame really.

[Wrath]

Cant you just buy the whole chassie from a S6 then?

[urS6Tom]

Cant you just buy the whole chassie from a S6 then?

That'd be ideal, but I don't know of one for sale. If I could just reuse the front and rear subframes from the A6 I already have then that'd be great... assuming I can remove them ok!

[urS6Tom]

Have found an S6 chassis so will be getting that blasted and painted. Think I'll start my own thread!


Sent from my iPhone using Tapatalk

[Vorsprung durch Technik]

Have found an S6 chassis so will be getting that blasted and painted.

Sent from my iPhone using Tapatalk

Where did you find that? Its the sensible way to go, get it cleaned and painted and bushed up and just do the job all in one day.