Announcement
Collapse
No announcement yet.
Project Zombie - 3B back from the dead
Collapse
X
-
-
Originally posted by twoqu View PostIn the absence of any codes, perhaps the MFTS?
Not sure if just pulling the connector off is the correct test!
Agreed, the MFTS may be the culprit. With the reversed manifold and radiator on an angle it makes getting at it rather difficult. Probably a rad out job91 Modded 3B
14 A6 Avant Black Edition
Comment
-
Originally posted by europeanme View PostSteve, which sachs did you go for?...as I'm running a 4 puck race sachs from the Greg S GB....
Mike
What's yours like?
Steve91 Modded 3B
14 A6 Avant Black Edition
Comment
-
Originally posted by SteveH View PostHi Robin,
Agreed, the MFTS may be the culprit. With the reversed manifold and radiator on an angle it makes getting at it rather difficult. Probably a rad out job
Comment
-
Originally posted by 4WheelDrifter View PostLooking fantastic, Steve. Good work.
I actually like the DTM tailpipes, they are a period feature. It's a shame Scorpion made them all wonky though.
It's a shame you don't still have the Porsche Cups. I wouldn't part with mine, even if they are relegated to winter wheels.
The rear box isn't sitting right which makes it look worse than they actually are.91 Modded 3B
14 A6 Avant Black Edition
Comment
-
Originally posted by targus View PostYou've missed out on putting up one picture that members normally do - The open rear window shot
I would have taken a few more, but as soon as I found somewhere useful we were told the yard was being locked up for the night. I got one shot and had to leave.91 Modded 3B
14 A6 Avant Black Edition
Comment
-
Originally posted by Rusty View PostAnd where's the pretty girl draped over the bonnet, Tom_ style?
If anyone has a friendly wife/girlfriend that would like to drape themselves over my hood, please drop me a PM. Always happy to take a lady out for a ride91 Modded 3B
14 A6 Avant Black Edition
Comment
-
Originally posted by SteveH View PostMike, I'm running the 4 puck sintered also. I'm used to it now and it's not savage at all. Bite is high on the peddle, so I'll try a little adjustment on the master cylinder pushrod.
What's yours like?
Steve
Comment
Comment