Titanium Grey S4 Avant

[hunker7]

Visually subframe bushes look good, but used a crowbar and there is quite some movement there so next on the list will be Albert solid bushes.

How much am I looking at to powder coat front subframe?

[quattrostyle]

Are the shocks locked up properly in the struts? Although if not I think you would hear it under driving.

[hunker7]

Track rod ends are new, ball joints are new, subframe bushes are good, shock absorbers are new, top mounts are new. There are no knocking anywhere from the suspension at all.

[diesel des]

Check again. Something is loose or wore. Subframe bushes ok? Ball joint and track rod end?

Sent from my LG-H955 using Tapatalk

[hunker7]

That does not look good......

Sent from my Nexus 6P using Tapatalk

That video was taken when had old shocks and bushes etc. But even now when I did all front suspension it still does that. I'm 100% everything is tightened.

[diesel des]

Nope something is loose

Sent from my LG-H955 using Tapatalk

[Majorcina]

Not good at all

[Kieron20V]

That does not look good......

Sent from my Nexus 6P using Tapatalk

[hunker7]

Is this movement OK? All bushes and stuff are new/in good condition.

[hunker7]

Forgot to mention, I have also fitted 5mm led in each of the door handles and we connected to the interior lights. So now when car is unlocked led comes on and illuminates handles

I'll try and make video of how it looks

Next job is a timer circuit so I can make side lights to come on when car is unlocked

[hunker7]

BTW just went for a spin and man she's stable Want to drive it hard everywhere now

[hunker7]

Good old Dad eh,looks a fab tool.

I know He made timing belt locking tool and now this. I do owe him big time

I'll drop you a PM

[Vorsprung durch Technik]

Arrived today and I'm all done, thanks again.

Homemade Bilstein tool is made of metal pipe, bearing shell and a nut, oh and a washer.

Good old Dad eh,looks a fab tool.

[hunker7]

Arrived today and I'm all done, thanks again.

Homemade Bilstein tool is made of metal pipe, bearing shell and a nut, oh and a washer.

[Vorsprung durch Technik]

I did what I should've done at the start and bought pair of B6 Bilsteins. Because I didn't want to go through all the work to take struts off, with help from dad (it was mostly dad's work to be honest ) we made a tool that works same as original Audi tool but for B6's (makes things incredibly easy)

Yet to test drive her but I am 100% it'll be better than it came out of factory

So your done now and my Audi tool arrived today?

Love the look of that homemade Bilstein tool,what tool did you use the other end to make it work?