Need to do the loom and am waiting on the vems ecu coming back from testing. That is taking too long. Hopefully by end of month...
Sent from my LG-H955 using Tapatalk
Sent from my LG-H955 using Tapatalk
-
-
Engine loom done. Started putting some trim on.
Sent from my LG-H955 using TapatalkComment
-
Windows now fitted but am missing trims for quarter Windows. Did some more wiring and fitted the oil cooler.
Welded up most of the crank breather piping too.
Sent from my LG-H955 using TapatalkComment
-
Heey man where did u find that long oil cooler??? searching for the same size... help me please)))
P.S. Real heavy job done..Audi S6 C4 2.2T Quattro 1997, full rebuild....
Audi A5 Sportback V6 2.7 TDI 2011
Volkswagen Phaeton V6 3.0 TDI 2009Comment
-
-
Have the race tech dash 2 pro mouted too.
Sent from my LG-H955 using TapatalkComment
-
So I have been working on the car loom. Most of the stock quattro loom was a nightmare due to the autocheck system and the talking woman sensing every dam thing. So the only part of the stock loom that's left is the bit that runs from the switches to the fuse box and even that has had to be modified. So I have new cables running to the front and back of the car and have all the rear lights working. I have the horn, air blower, wipers working and another 2 fuse boxes fitted. The horn now operates from the button on the stalk that used to operate the computer woman. It's real slow work. Now just need to do all the front lights and rad fan etc and the dash computer. It now turns over on the starter from the key and the oil system is connected. Getting oil every place It should and some pressure which is good.
Sent from my LG-H955 using TapatalkComment
-
almost ready
audi coupe quattro b2 2.2 20vt project (573hp-626nm)
TWINCHARGED power,zero lag
AEM W/M injectionComment
-
Not far away now. If I had my vems I would of started the engine this weekend. But these other things need done anyhow so no big deal.
Also connected up the fuel pumps and relays. Wound the fuel pressure regulator flat out to 10 bar and checked for leaks. Was drawing 50 amps at that point and drained the half charged battery in 10 minutes.
Sent from my LG-H955 using TapatalkComment
-
Hey Des... I must have missed something (if not everything) - WTF is the custom pipework between plugs 2 & 4 ?Paul Nugent
Webmaster http://S2central.net
Administrator http://S2forum.com
1994 S2 Coupe ABY - aka Project Lazarus
2001 A6 allroad 2.5TDi - family tank
2003 S4 Avant 4.2 V8 - daily burble
Purveyor of HomeFries and Exclusive agent for Samco hose kits (S2/RS2)
There are only 10 kinds of people that understand binary - those that do, and those that don't
Comment
-
Plugs 2 and 4? Point me to the post Paul.
Sent from my LG-H955 using TapatalkComment
-
Ahh on the rocker cover. That's the crank case breather. It's the highest point on the engine so least likely to have oil. That goes back in inch pipe to a separator system made by Mann. Then it returns via a check valve to the sump. It's the 400 model and is rated at 700 bhp..
Sent from my LG-H955 using TapatalkComment
-
Picky.
Sent from my LG-H955 using TapatalkComment
-
Ahah - subtle - looks like it came of a truck / lorry engine !Paul Nugent
Webmaster http://S2central.net
Administrator http://S2forum.com
1994 S2 Coupe ABY - aka Project Lazarus
2001 A6 allroad 2.5TDi - family tank
2003 S4 Avant 4.2 V8 - daily burble
Purveyor of HomeFries and Exclusive agent for Samco hose kits (S2/RS2)
There are only 10 kinds of people that understand binary - those that do, and those that don'tComment
-
Yep suitable for trucks etc. People normally use the smaller 200 model.
Sent from my LG-H955 using TapatalkComment
Comment