Announcement
Collapse
No announcement yet.
Any interest it C4 adjustable camber/caster plates?
Collapse
X
-
The motorsport versions have 43mm adjusment. Hope they fit in place...
Already made a DXF of the camberplates that fit stock top mount bearings and bushes, can only get 14mm adjustment on them. Of course also the big stock spring is limiting the amount of the adjustment so 14mm can be fine.
Audi UrS4 Avant 2.5 20vt - twincharged - Project
Audi 80q B4 Sedan 2.2 20vt - Daily user
BMW 320d Touring e91 M-Sport - Daily user
BMW 740iA e38 - Project
Comment
-
No, I don't know. It may be pointless to make plates for the stock top, as the adjustment on the stock parts is propably close to the same. The size of the top bushing is so big, also the bearing construction needs attention as it's under the plate. Quite difficult to make it work with more adjustment.
Audi UrS4 Avant 2.5 20vt - twincharged - Project
Audi 80q B4 Sedan 2.2 20vt - Daily user
BMW 320d Touring e91 M-Sport - Daily user
BMW 740iA e38 - Project
Comment
-
Seems to fit in place nicely. Only change I have to do is to move the camber adjustment bolts closer to each other. Now they limit the movement a bit.
Audi UrS4 Avant 2.5 20vt - twincharged - Project
Audi 80q B4 Sedan 2.2 20vt - Daily user
BMW 320d Touring e91 M-Sport - Daily user
BMW 740iA e38 - Project
Comment
-
A small improvement to get the full adjustment in use. Didn't wan't to change the main plate, because it would go weaker if it don't have the notches between the adjustment holes.
A vid of the first version, without the extra threaded holes:
https://www.youtube.com/watch?v=TdXee4AhnOALast edited by Thuppu; 1 December 2014, 16:55.
Audi UrS4 Avant 2.5 20vt - twincharged - Project
Audi 80q B4 Sedan 2.2 20vt - Daily user
BMW 320d Touring e91 M-Sport - Daily user
BMW 740iA e38 - Project
Comment
-
Last important part made up for the camber plates. Small bushings to get a proper fitment between the shock and the bearing. This work with at least Bilstein and Koni shocks, propably with others also.
Last edited by Thuppu; 9 December 2014, 20:27.
Audi UrS4 Avant 2.5 20vt - twincharged - Project
Audi 80q B4 Sedan 2.2 20vt - Daily user
BMW 320d Touring e91 M-Sport - Daily user
BMW 740iA e38 - Project
Comment
-
First pair ships out to USA. Hope everything works good because I havn't bee able to test these yet.
Audi UrS4 Avant 2.5 20vt - twincharged - Project
Audi 80q B4 Sedan 2.2 20vt - Daily user
BMW 320d Touring e91 M-Sport - Daily user
BMW 740iA e38 - Project
Comment
-
Thanks! These will ad a lot more adjustment range than 2B, propably some like 20-25mm more.
Audi UrS4 Avant 2.5 20vt - twincharged - Project
Audi 80q B4 Sedan 2.2 20vt - Daily user
BMW 320d Touring e91 M-Sport - Daily user
BMW 740iA e38 - Project
Comment
Comment