New S2 Avant Nothelle N300 owner
Collapse
X
-
Looks good.Nothelle S2 Avant
Black Ur project
Silver Rs2 Project gone
Ocianic Ur project gone
S2 Coupe project gone
Urs6 plus project goneComment
-
I used a guitar string to remove the phone antenna.



Left no marks at all.
My drivers door has dropped.

I gather you take these bolts out and adjust using allen key.


Which way do you turn to raise the door?
Tried both ways and only seems to get worse!
Sent from my iPhone using TapatalkNothelle S2 Avant
Black Ur project
Silver Rs2 Project gone
Ocianic Ur project gone
S2 Coupe project gone
Urs6 plus project goneComment
-
The doors can be adjusted in all 3 axis - quite a PITA to adjust. The latch can also be adjusted in 2 axis. I would first see if you can lift the door at the rear as this will indicate if the hinge is worn, this is common due to the weight of the doors. If so replace the hinges first. With regards adjustment, my suggestion is to adjust iteratively, one step at a time.
To pick the rear of the door up, wind in the top hinge hex adjuster and/or wind out the lower one. In order to adjust them, you need to loosen the forward hinge mounting bolt. To do that without destroying the paint on the wing trailing edge you really need to remove the wing or modify an obstruction spanner.
Good luck. It’s satisfying when you get it spot on
Panthero Coupé quattro 20vt
Indigo ABY coupé
Imola B6 S4 AvantComment
-
Thanks Alex. I will give it a go in the morning. Beer o'clock nowThe doors can be adjusted in all 3 axis - quite a PITA to adjust. The latch can also be adjusted in 2 axis. I would first see if you can lift the door at the rear as this will indicate if the hinge is worn, this is common due to the weight of the doors. If so replace the hinges first. With regards adjustment, my suggestion is to adjust iteratively, one step at a time.
To pick the rear of the door up, wind in the top hinge hex adjuster and/or wind out the lower one. In order to adjust them, you need to loosen the forward hinge mounting bolt. To do that without destroying the paint on the wing trailing edge you really need to remove the wing or modify an obstruction spanner.
Good luck. It’s satisfying when you get it spot on

BTW. Have you still got a contact in Belgium for Beker radios? Was reading your thread from a couple of years ago.Nothelle S2 Avant
Black Ur project
Silver Rs2 Project gone
Ocianic Ur project gone
S2 Coupe project gone
Urs6 plus project goneComment
-
Comment
-
Door sorted.
Fiddly job. I used a length of wood under the door and jack so I could adjust the door whilst it was in the right position.

Sent from my iPhone using TapatalkNothelle S2 Avant
Black Ur project
Silver Rs2 Project gone
Ocianic Ur project gone
S2 Coupe project gone
Urs6 plus project goneComment
-
Yes, there was a small amount of play. Are new hinges still available?Nothelle S2 Avant
Black Ur project
Silver Rs2 Project gone
Ocianic Ur project gone
S2 Coupe project gone
Urs6 plus project goneComment
-
Comment
-
Nothelle S2 Avant
Black Ur project
Silver Rs2 Project gone
Ocianic Ur project gone
S2 Coupe project gone
Urs6 plus project goneComment
-
I found a nice Becker. Red display to!

Sent from my iPhone using TapatalkNothelle S2 Avant
Black Ur project
Silver Rs2 Project gone
Ocianic Ur project gone
S2 Coupe project gone
Urs6 plus project goneComment
Comment