You can change the style the forum displays by selecting your preferred style at the bottom left of the site.
We have made an enhancement so that old threads should now link from search results to the correct thread. This is not yet in place for single post links
Yes, the air con won't work as I have no compressor or pipework under the bonnet. I did however connect everything up behind the dash ready in case I find the aircon bits and decide to re fit at a future date.
It was 6 pin (I think). Will check tomorrow and get another pic. The car had some fancy stereo stuff in the past so it might be related to CD changer or Amp? Not sure
Nothelle S2 Avant
Black Ur project
Ocianic Ur project gone
S2 Coupe project gone
Urs6 plus project gone
You could use lock wire to remove it like they cut cheese and the black plug I know where it goes just can't remember what plugged in to it. It sits on the metal frame that holds the dash in place behind the ashtray ( coil tray ) there is a metal finger that it pushes on to. Regards Lynn
You could use lock wire to remove it like they cut cheese and the black plug I know where it goes just can't remember what plugged in to it. It sits on the metal frame that holds the dash in place behind the ashtray ( coil tray ) there is a metal finger that it pushes on to. Regards Lynn
(was a metal finger) Let me know if you remember.
The wire sounds like a good trick. I'm going to warm it up a bit first with the heat gun set low as that will hopefully soften the adhesive.
Nothelle S2 Avant
Black Ur project
Ocianic Ur project gone
S2 Coupe project gone
Urs6 plus project gone
You see the black plastic plug has a round side and also the white one they should have a 6mm thread to sit on maybe like the one in your photo. They don't go to the cigarette lighter and handbrake light wires ?
You see the black plastic plug has a round side and also the white one they should have a 6mm thread to sit on maybe like the one in your photo. They don't go to the cigarette lighter and handbrake light wires ?
No, they are connected up and working. I see the mount holes now you have pointed them out. Do they fit on the two threaded screws coming out of that mounting plate? We seem to be getting warm!
Nothelle S2 Avant
Black Ur project
Ocianic Ur project gone
S2 Coupe project gone
Urs6 plus project gone
No, they are connected up and working. I see the mount holes now you have pointed them out. Do they fit on the two threaded screws coming out of that mounting plate? We seem to be getting warm!
Yes mine were on a little threaded finger although mines a coupé and where facing back towards the heater matrix yours look like they face upwards for some reason I don't know.
Don't know why the wire plugs are getting warm although I didn't check mine to see if they were just reconnected them. Maybe the thread is a heat sink or maybe I'm talking rubbish .
Don't know why the wire plugs are getting warm although I didn't check mine to see if they were just reconnected them. Maybe the thread is a heat sink or maybe I'm talking rubbish .
Nothelle S2 Avant
Black Ur project
Ocianic Ur project gone
S2 Coupe project gone
Urs6 plus project gone
We process personal data about users of our site, through the use of cookies and other technologies, to deliver our services, personalize advertising, and to analyze site activity. We may share certain information about our users with our advertising and analytics partners. For additional details, refer to our Privacy Policy.
By clicking "I AGREE" below, you agree to our Privacy Policy and our personal data processing and cookie practices as described therein. You also acknowledge that this forum may be hosted outside your country and you consent to the collection, storage, and processing of your data in the country where this forum is hosted.
Comment