New S2 Avant Nothelle N300 owner

[davidradio]

They look in great condition

[Tractor Dave]

Lynn kindly sent me some good stuff


Hopefully that job is now done for good.

Spent time figuring out the plastics and fitted everything I have left.



I think there is one missing from behind the above shot? Slides into the rectangular hole.

And I have this left. Not sure where it goes.


I have no under tray if anyone has one for sale.



Sent from my iPhone using Tapatalk

[Nuvo]

That unidentified item sits between the bottom of the drivers side headlight and the top of the front bumper.
Its Item #31 in the diagram below.

[Tractor Dave]

That unidentified item sits between the bottom of the drivers side headlight and the top of the front bumper.
Its Item #31 in the diagram below.

I see, thanks. Am I missing one from the other side then?

[Nuvo]

No, I don't think so. From memory I think this part is used to form part of channel to guide air into the air filter box.

[Tractor Dave]

No, I don't think so. From memory I think this part is used to form part of channel to guide air into the air filter box.

That's good to hear. Bumper and lights going on tomorrow (hopefully) so I will fit it then. Should there be a piece behind that light which slots into the groves on the other plastics parts? I currently have a big square hole!

Thanks very much again.

[newsh]

Yes there’s a part that slides out to get access for changing bulbs

[Tractor Dave]

Yes there’s a part that slides out to get access for changing bulbs

Thanks John. Anyone have a spare? If not, I will have to get creative with the aluminium again!

[Error404]

I might have one spare, I will check.
If not Try the dealer, I bought them all new a few years ago, they weren’t expensive.

[LHD_Kid]

I might have one - not sure what it looks like though...

[Tractor Dave]

I might have one - not sure what it looks like though...

Like this but without the hole

s2 air guide.jpg

[Tractor Dave]

Bumper has to wait for the paint to dry.




Sent from my iPhone using Tapatalk

[rxl]

Like this but without the hole

s2 air guide.jpg

there is a hole so the airbox can take cold air and not be blocked

[Tractor Dave]

there is a hole so the airbox can take cold air and not be blocked

If you look at my pic above, I already have the plastic with the hole for the air intake. The piece I'm missing slots in the rectangular hole and closes this section off to the hot air around the turbo. I did find a pic last night on ebay.de which said it was for the S2 and it was like the above, but without the hole.

[Tractor Dave]

This one.