I got a pair of Bosch ones from my local motor factor, they were not overly expensive.
Announcement
Collapse
No announcement yet.
My 3B to RS2 project
Collapse
X
-
Since replacing the knock sensor and after a couple more map updates from Dmitri I have now logged a WOT 3rd gear pull from 2k to 7k with no knock
Comment
-
Stoked
Comment
-
Originally posted by newsh View PostSince replacing the knock sensor and after a couple more map updates from Dmitri I have now logged a WOT 3rd gear pull from 2k to 7k with no knockCurrent-2004 Impreza PPP wagon
Sold-92 3B coupe-RS2+, 996s, konis, rear torsen, forged rods........
Sold ABY-stock
Comment
-
Done it so many times it feels slow now..
Comment
-
Yes, if you drive them slow for a while. :-)
Comment
-
Was out for about 7 hrs on this today
Comment
-
Very nice! Good day for it if the weather was anything like here.
I am always tempted by bikes, but based on how I ride a jump bike on the road it would be a bad ideaCurrent-2004 Impreza PPP wagon
Sold-92 3B coupe-RS2+, 996s, konis, rear torsen, forged rods........
Sold ABY-stock
Comment
-
Got some work done on the coupe today.
My list of jobs is:
1/ Change rad to new alloy one from Vidar. Got the old leaky one removed.
Need to drill the brackets for the fan cowling.
Need to decide 3B fan (cowling rusty so needs blasting, painting, wiring needs sorting as it's been extended at some point in a horrible way)
Or ABY fan (cowling plastic) but will also need resistor pack and wiring mods which I don't really understand how to do. And will it clear the ABS pump, especially as the ali rad is thicker than stock.
Advice welcome on this subject.
2/ Fit new AN + braided turbo oil feed line from Terrybullwon. Got the old one off, end fittings were rusted, crimps actually split.
But the feed flange sheered off, crappy 034 aluminium part so have to wait for a new one.
3/ Fit new front knock sensor, was surprised to find this one split as well. Job done and wiring tidied up.
4/ Replace leaky steering rack with another second hand one. Not started this job yet, I know it's a world of pain.. wondering whether to just get the replacement rebuilt as I don't ever want to have to do it again.
5/ I think there are more jobs, like painting the sunroof panel, maybe the roof and the laquer is peeling on the bonnet.
6/ Oh Yeah.. Still need to fit the Andy Casey rear brake upgrade but still waiting for calipers to arrive from Dominator.
Comment
-
My 3B to RS2 project
Fan wiring
Another cracked knock sensor.
Sheared oil feed flange..
Comment
-
Got the fan wiring diagram from S2 Central
Comment
Comment