Da Green Monstah

[urs4guy]

Very accurate and good work!

What are your impressions of the new suspension?

The car is still under the knife. The hold up has been and continues to be a custom billet crank of the 92.8 variety that is done but is awaiting the final engineering/fabrication of the pulley assembly.

Hap, wit dakine wait not from Evahboost, Maguire

[Topolini]

The car is still under the knife. The hold up has been and continues to be a custom billet crank of the 92.8 variety that is done but is awaiting the final engineering/fabrication of the pulley assembly.

Hap, wit dakine wait not from Evahboost, Maguire

Tubular frame were bent and welded to the car or previously been designed on paper drawing with dimensions. I ask directly - do you have drawing?

[urs4guy]

Tubular frame were bent and welded to the car or previously been designed on paper drawing with dimensions. I ask directly - do you have drawing?

There are no drawings it was a one-off project. The tubular subframe was fabricated to support the new triple anchoring system for the motor, to strengthen a weak area of chassis stiffness, to move the motor back and down a bit, to lighten the front end, and to improve turn-in performance and handling. We'll see if it works out.

Hap, wit dakine tuning of another sort not from Evahboost, Maguire

[urs4guy]

urQueness Colorado Mafia Style...

Here are a few more pics of the Silber urQ stroker build. They had to do some serious front bumper modding to accommodate the full front radiator:













Hap, wit dakine urQueness not from Evahboost, Maguire

[AndyP]

Is there a build thread anywhere for that car?

[Thuppu]

Wow, nice! Everything is this thread is so win win.

[urs4guy]

Well gentlemen

The long and inglorious wait for my billet 92.8 stroker crank is almost over. It was ready over 2 months ago but this crazy weather that the US East Coast has been suffering through delayed things even further. The tracking info I have shows it arriving on Friday. Here's a cel phone pic for the curious. I am so looking forward to getting back to the build.



Hap, wit dakine crankiness about to end not from Evahboost, Maguire

[AndyP]

Looks great,who made it?

Any updates on the chassis mods?

[simon20vq]

What a build thread this is! Will be interesting to see how noticeable all these modifications are when finished

[A1QSHIP]

Has the crankshaft had the counter weights modified? If so, who did this for you?
Thanks, Chris

[Kieron20V]

Has the crankshaft had the counter weights modified? If so, who did this for you?
Thanks, Chris

It's a billet crank, not an Audi one that's been modified. So built to his requirements / specs I'd imagine. $$$$$$

Sent from my HTC One X+ using Tapatalk

[urs4guy]

Looks great,who made it?

Any updates on the chassis mods?

A small crank specialty company here in the USA. Chassis should be going back together here shortly with the motor about ready to back together. Lots of pics to follow.

Hap, wit dakine cranky info not from Evahboost, Maguire

[urs4guy]

What a build thread this is! Will be interesting to see how noticeable all these modifications are when finished

Lots of updates and driving impressions to follow.

[urs4guy]

It's a billet crank, not an Audi one that's been modified. So built to his requirements / specs I'd imagine. $$$$$$

Sent from my HTC One X+ using Tapatalk

You are very correct sir!!!

[Mcstiff]

Some, sorta-kinda 3 yr old, info aboot that billet hotness http://www.motorgeek.com/viewtopic.php?f=6&t=41648