My sleeper

[hammer]

Her some Updates. My bulid goes to the end[emoji4]

I make this to get the rim 3cm to the front

Original wiring and things i never ned

New wiring
Vipec on his New place and have to make place for the steering

[hammer]

4" downpipe and 3,5" exhaust

[diesel des]

Big exhaust!

[Thuppu]

Nice exhaust!

[hammer]

Thanks

[hammer]

I also reduce my Rear axle,because i dont geht the 8,5 rims in

Make the upperarm 1cm shorter and take out the clip at the driveshaft to win 6 mm

This week i adjust the axes and Hope that it will be enough. But it looks good[emoji4]

[hammer]

5x Ex temp. Oil and fuelpressure

[hammer]

So in the last 3 weeks i had many Problems with my car.
Frist the Electric steering dosnt work, so i ned i New ecu for it. Than i didn't get fuelpressure and find out that the aeromotive pro series have wrong polarity.
Also had many errors in my vipec and i find out that i pind the trigger on the cam wrong [emoji20]. So i damaged all two triggers.
Yesterday i changed the First one, today i have to change the 60-2 on the crankshaft.

A cheaper version than the oem[emoji6]

[hammer]

Spend one Day by a tuner and we dont get my car run [emoji35] .Problem is big overlap from the cams and my Big injectors witch are 8 cm in the back.
But today i get them startet[emoji1] . It dont Run under 1500u/min.

https://vimeo.com/138341246

Next weekend i will Start the First testdrive

[V6quattro]

Very nice! Pleas make some videos when it is ready!!

[hammer]

Some good and some Bad news.
First adjustdrive wos very positiv. I have over 1bar boost at 4000rmp with just 50% throttle and with "only 2bar" the car Fells like have 800hp, this just at ~ 5600rmp.
I can make any more Tests because the Engine brokes[emoji19] .
But im very happy with the result.

Her the pics if my engine. I think it wos my mistake. At the 3 Zylinder i broke a pistonring at building and so the block broke. Possibly thirst the block broke and ....
But **** happens and i looking forward to make them Run again[emoji4]

[Thuppu]

So what block was this, and what size bore?

[hammer]

2,5tdi and 81.5mm

[diesel des]

Maybe your block was a bad casting. Has that broke into a water way?

Sent from my HTC Desire HD A9191 using Tapatalk 2

[hammer]

Yes you See it on the pic