Small Urs6 project!

[maiks]

Nice job your doing Looks wery nice!

Thanks!

sandman1111

I have driven 0 km so I don't know

[maiks]

[img]http://www.s2forum.com/forum/attachment.php?attachmentid=57925&stc=1&d=14575500 88[img]




I didn't want to brake new Trw bushings, so poly bushings stay for the future..

[maiks]

Have not done anything special. New wastegate. Also a cat to pass the MOT test.
Now everything is ok. Just must remove the cat (HP killer)

[Spyform]

Very clean & beautiful under the car and under the hood! Tubli! Mul vaja veel kõik seda sama teha!

[Roman S]

what rods you use?

[maiks]

what rods you use?

Don't know the manufacturer.

[diesel des]

Have not done anything special. New wastegate. Also a cat to pass the MOT test.
Now everything is ok. Just must remove the cat (HP killer)

Is that a 4 inch 100mm intake hose on your turbo? Were did you get it from?

Sent from my LG-H955 using Tapatalk

[maiks]

Is that a 4 inch 100mm intake hose on your turbo? Were did you get it from?

Sent from my LG-H955 using Tapatalk

Yes! I got it from a local dealer. Originally it was blue, but I painted it black with plastidip.

[diesel des]

Yes! I got it from a local dealer. Originally it was blue, but I painted it black with plastidip.

It seems like a nice tight bend. Do they sell online?

Sent from my LG-H955 using Tapatalk

[maiks]

It seems like a nice tight bend. Do they sell online?

Sent from my LG-H955 using Tapatalk

Pm'd

[maiks]

Few members asked how poly bushes are to drive?
First bigger run is done, I tried a good road and a bumpy road.
Results: I am very pleased. Like a new car
But I don't know how it is to drive with all new oem bushes, maybe even better...
But I like.

[maiks]

Welded the turbo a little. Before it was with some kind of clamp what was not reliable.
No boost leaks needed.
Also powdercoated it black.

[popdemonic]

the rubber boot on the tie rod is going to be torn out soon.

[maiks]

the rubber boot on the tie rod is going to be torn out soon.

Why do you think that?

[popdemonic]

BTDT. As you seen when you tighten the nut of the tie rod end, the rubber boot being pushed against the steering arm.there're 2 part no. for C4 tie rods.i got the bigger one like yours.finally i need to fabricate small
Metal sheet inserted the hole to make the tie rod sits way higher and
Clear the rubber boot.