Good work man!!!!
Announcement
Collapse
No announcement yet.
Small Urs6 project!
Collapse
X
-
Thanks.
And it happened agan
This time I removed the exhaust manifold..
Both flanges were bend...
I think stainless manifold is crap...
But maybe it just bends at the beginning and later does not bend so much..
Weird, lots of people drive with stainless and I haven't heard about a problem like that.
There were not very smooth welding, so I grind it a little, now it seems to be much better.
Comment
-
I have been using a "gasket" cut out from 1mm stainless sheet. If the flanges are 100% flat then there would not be any need for a gasket.
Audi UrS4 Avant 2.5 20vt - twincharged - Project
Audi 80q B4 Sedan 2.2 20vt - Daily user
BMW 320d Touring e91 M-Sport - Daily user
BMW 740iA e38 - Project
Comment
-
Originally posted by Thuppu View PostI have been using a "gasket" cut out from 1mm stainless sheet. If the flanges are 100% flat then there would not be any need for a gasket.
Sadly the problem was on the bend flanges. At the beginning flanges were flat, but there was more than 1 mm bend... And flames burned gasket out and also turboblanket does not hold flames and has started to burn out
Now it is all flat and I hope it stays flat It's a little funny not to put any gaskets and I already have those, so this time I'll go with gaskets
One guy told that he had cast iron em and even that bend a little, so the bolt broke in to the engine Luckily my bolts are fine
And engine and gearbox mounts arrived also!
Attached Files
Comment
-
Originally posted by macspring View PostSorry don't understand this.
Thanks.
http://www.s2forum.com/forum/member.php?u=215
Audi UrS4 Avant 2.5 20vt - twincharged - Project
Audi 80q B4 Sedan 2.2 20vt - Daily user
BMW 320d Touring e91 M-Sport - Daily user
BMW 740iA e38 - Project
Comment
-
And back together... Not the cheap heat tape, but after warming it exploded to fire
Luckily I had the fire extinguisher in my trunk and nothing serious happened.
Seller told that he had never problems with that
Now I have driven a lot and seems that it won't burn any more
Comment
-
Comment