-
96 URS6 plus speck saloon
96 URS6 plus speck estate
94 2.6 80 Avant
99 2.8 final edition Cabriolet -
Taking my time to connect the wires, hoses, breathers and vacs.
The jig saw puzzle is slowly coming together.
Where do the knock sensors attach to the block? I have two, one green and one blue.
Sent from my iPhone using TapatalkNothelle S2 Avant
Black Ur project
Silver Rs2 Project gone
Ocianic Ur project gone
S2 Coupe project gone
Urs6 plus project goneComment
-
Things are slowly coming together.
Where do the knock sensors go on the block?
I have two, one green and one blue.
Sent from my iPhone using TapatalkLast edited by Tractor Dave; 30 September 2018, 16:51. Reason: Sorry for the double post. Tapatalk playing up!Nothelle S2 Avant
Black Ur project
Silver Rs2 Project gone
Ocianic Ur project gone
S2 Coupe project gone
Urs6 plus project goneComment
-
Just below water rail, green at front.Originally posted by Tractor Dave
Here you go, make sure everything is clean, torque to 20 Nm.
Last edited by newsh; 30 September 2018, 18:57.Comment
-
Great! Thanks again John
Nothelle S2 Avant
Black Ur project
Silver Rs2 Project gone
Ocianic Ur project gone
S2 Coupe project gone
Urs6 plus project goneComment
-
Knock sensors fitted no problem.
Wires all fixed
I have an issue with this valve. I can’t get the rubber boot on. I think the valve is broken. There is a spring hanging out. I’ve ordered a new one.
I don’t want to fit anything else until this is sorted as there won’t be any space afterwards.
Sent from my iPhone using TapatalkNothelle S2 Avant
Black Ur project
Silver Rs2 Project gone
Ocianic Ur project gone
S2 Coupe project gone
Urs6 plus project goneComment
-
Whilst waiting for engine parts I’ve gone back to the interior.
The spray booth!
Front trims covered in headliner material
I died my blue carpet!
Looks not too bad. Needs another coat and I ran out of stuff.
I found I’m missing more parts. Passenger side air duct and rear ducts plus connector that drops down from dash shroud.
And I can’t figure out how to get the sunroof liner off. The guide pics have gone.
Sent from my iPhone using TapatalkNothelle S2 Avant
Black Ur project
Silver Rs2 Project gone
Ocianic Ur project gone
S2 Coupe project gone
Urs6 plus project goneComment
-
Sunroof liner - make it flat and move it back a little, then there are clips which push off a couple of pegs when you push it backwards.
Can get a pic if you want, mine is out the car at the moment...Comment
-
Yes please. That should help.
Sent from my iPhone using TapatalkNothelle S2 Avant
Black Ur project
Silver Rs2 Project gone
Ocianic Ur project gone
S2 Coupe project gone
Urs6 plus project goneComment
-
Be careful with the clips, they can be fragile... Try and push the sunroof panel back keeping it square, if it twists it makes more friction and you end up pushing harder which is never good.
Comment
-
Here you go....You do not have permission to view this gallery.
This gallery has 1 photos.Comment
-
Came out easy when I knew where and how to push.
After with new lining
The clips and pegs for anyone else taking this on
I’m just looking at my seat plug and wonder if it will work with my Recaro’s?
In the car
On the Recaro loom
Any advice gratefully received
Sent from my iPhone using TapatalkNothelle S2 Avant
Black Ur project
Silver Rs2 Project gone
Ocianic Ur project gone
S2 Coupe project gone
Urs6 plus project goneComment
-
No, the green plug is for seat heating.
1989 Audi 80 Quattro
1994 Audi 80 Quattro CompetitionComment
-
Ok. Thought something wasn’t right. I take it my Recaros don’t have heating then as there is only one plug on the underside of the seat.
Sent from my iPhone using TapatalkNothelle S2 Avant
Black Ur project
Silver Rs2 Project gone
Ocianic Ur project gone
S2 Coupe project gone
Urs6 plus project goneComment
Comment