Audi Coupe Quattro 2.3 20V - Czech Republic

[filip.krticka]

MOT = technická

[Tom_]

today pressed diff bushing into the diff holder

[Tom_]

after blasting i used a rust remover to clean pores of subframe,because of humidity of air.


and completed a diff pump,or how is that called in english


Now i am waiting to paint subframe from other side

[Tom_]

subframe painted with primer.Now waiting for a cure of paint


rear brake calipers dismantle,clean inside the hole,checked piston

[Tom_]

on the left fuel lines, on the right brake lines with fittings



Now, i am waiting to better weather, because now around 10 cm´s snow and - 10 celsia

[Tom_]

some new oem spare parts

[Tom_]

new -30/-30 springs

compare vs tired oem


subframe before painting


control arms

fuel filter holder

prop shaft (longer part)

prop shaft (shorter part)

drive shaft

next one

subframe

plates

caps


a few parts left to be painted... and waiting for parts to completed parts together

[Tom_]

updates

painted calipers

i dont know ,how its named in english




subframe painted from other side

[Tom_]

parts waiting for bushings,dampers,bearings,tie rods,etc...



painted another diff holder.Waiting for diff and other diff holder from blasting


and some oils + oil filter

[irishs2]

Lots of work done there, but is that a fuel filter I see painted ?

Everytime there is an update on this thread, I look forward to see what you have done.

[Tom_]

yes,its painted because i want to keep it black.OEM bosch filter havent any paint or another protect before rust...but i know,its a ********

Now i expected other parts to completed rear subframe and new kumho ku36 tyres.But what i already hate,its a work on body, under the car and work on new fuel and brake lines.I try to curve these lines,and its very,very hard

[Tom_]

Finally,i get my 225/45 tyres,looks superb

[Tom_]

some updates,differential,brake disc covers and diff mount blasted. Mount painted, disc covers as well.Now i must check a diff,if its there any sand,and than paint.Tomorrow i get a termo wrap on exhaust and other parts.

[Tom_]

diff painted,looking much better than before blasting and painting.Now i change a diff bolts and fill with new oil.
History of diff look
before


between

now

[Tom_]

propshaft done,new bearing fitted,only joints missing,because i haven't new clips.Exhaust get wrapped.