That's looking great
Announcement
Collapse
No announcement yet.
sjw185 aby to rs2
Collapse
X
-
Originally posted by Rusty View PostWhat brakes have you gone for?
Originally posted by irishs2 View PostNice job on the car, and good save on the rear subframe.
My own avant is from Aberdeen, seems none can escape the rust.
Thinking I will have to treat inside of doors back arches and repair replace wings before a respray
Comment
-
-
Coilovers are coming together, springs are specials at 250lbs. Still need to get them fitted though. Turned out to be more expensive than I first though but decided to go with them to see how they feel?
This is special spring next to standard.
Got the struts all painted with por15 will need to decide on topmounts and get them fitted.Last edited by sjw185; 29 June 2014, 01:30.
Comment
-
Originally posted by quattrostyle View PostWeird looking spring for an Audi, why did you go for this option?
Spring travel of 9" standard 2.5" diameter stock springs were either going coil bound or very close to coil bound up front so these springs were developed to allow more travel.
Mr Tonks is running these as I think he was getting some noise up front with the standard spring.
I decided to buy for all 4 corners in for a penny in for a pound!
I see KW springs are much shorter so they don't have this issue but need the 9" for DIY struts.
Comment
Comment