Coming along really well! 
Actually, your "before" pics are cleaner than my "after" pics
Actually, your "before" pics are cleaner than my "after" pics
-
-
look at what was on the floor after scrubbing the underside...i think there was twice as much again on my face/hair!
1996 Audi S2 - 295bhp and 326lb/ft - Complete Rebuild Project
1994 Audi 80 - 2.0 8v (slow but reliable!)Comment
-
after spending the last 2 days cleaning, de-rusting, i've started to paint.
after realising spot painting this stuff just looks silly...i've gone the whole shebang! (well the back end so far anyway!)
1996 Audi S2 - 295bhp and 326lb/ft - Complete Rebuild Project
1994 Audi 80 - 2.0 8v (slow but reliable!)Comment
-
When are those engine mounts going in?
Comment
-
i have them in my hand right now! about to fit them!1996 Audi S2 - 295bhp and 326lb/ft - Complete Rebuild Project
1994 Audi 80 - 2.0 8v (slow but reliable!)Comment
-
Get them in with pics! I'm awaiting my set to test
Comment
-
Just for you Jamo!
Here they are in place, although not fully bolted in...dont want to waste the nylocs now haha
quick question though...i cant remember taking them out, so i'm guessing the offset is towards the centre of the car?
and one of my lovely underside!
1996 Audi S2 - 295bhp and 326lb/ft - Complete Rebuild Project
1994 Audi 80 - 2.0 8v (slow but reliable!)Comment
-
Just in case anyone was wondering my method for de-rusting!
1st stage - Remove chassis sealant
2st stage - wire brush in a drill and give it some! when you hit pockets of rust you get a big puff of brown dust come out...looks cool!
3rd stage - treat with Jenolite (dont get it on your skin!)
4th stage - waxoyl1996 Audi S2 - 295bhp and 326lb/ft - Complete Rebuild Project
1994 Audi 80 - 2.0 8v (slow but reliable!)Comment
-
Great shots! Think the mounts are in wrong there shouldn't be the holes showingComment
-
I wasn't too sure, may have them on the wrong way around. One is elongated and the hole next to is is just normal, but wouldn't bolt in with them.
I'll have another play tomorrow.
But I really think they are great! Can't wait to fire her up
Sent from my HTC Desire using Tapatalk1996 Audi S2 - 295bhp and 326lb/ft - Complete Rebuild Project
1994 Audi 80 - 2.0 8v (slow but reliable!)Comment
-
just spent £44 on nuts at audi...WTF!!1996 Audi S2 - 295bhp and 326lb/ft - Complete Rebuild Project
1994 Audi 80 - 2.0 8v (slow but reliable!)Comment
-
Hehe wait till you do an engine rebuild and how much nuts and bolts cost you then!
Comment
-
most of that was just for exhaust manifold bolts etc! I love my car
on a happier note...the rear subframe and diff are all back in!
1996 Audi S2 - 295bhp and 326lb/ft - Complete Rebuild Project
1994 Audi 80 - 2.0 8v (slow but reliable!)Comment
-
+1 my rebuild bill for nuts 'n bolts was about 5x that
then add gaskets and bearings with a few sensors and there's not much change from a grand...
Anyway looking good, I expected to see pics of a rear subframe and diff on the car, yea've had an hour already
AUDI - saving Dad's from minivans since 1994
Comment
-
haha well my hands are pretty dirty so i thought id carry on with the chassis prep and engine. dont want to dirty my camera!1996 Audi S2 - 295bhp and 326lb/ft - Complete Rebuild Project
1994 Audi 80 - 2.0 8v (slow but reliable!)Comment
Comment