My sleeper

[hammer]

Will even a stock unmodified tdi pump rev to 8k rpm without problems? Do you use an Audi part or another manufacture when you buy these.

Sent from my HTC Desire HD A9191 using Tapatalk 2

Yes. Its have the same gears inside. Just the Outside is different.
My old one was from a tdi block witch was in good condition and never had a problem with it.
My new is from ebay.
Here tdi us 3b

[hammer]

Today i cut my old block

[Thuppu]

Nice!

[AndyP]

What bore was that on? And how thick are the liners?

[jsol]

Doesn't look like it is lined. No step at the bottom of the barrel.

[hammer]

What bore was that on? And how thick are the liners?

81.5 and the liners are ~6mm thick

[hammer]

Some special work at the crankshaft[emoji2]

[macspring]

My new is from ebay.

Just a comment, just in case it is helpful, I seem to remember one or maybe two reporting problems with new oil pumps that they were able to fix when they happened to take them apart to check on them before they used them on their brand new engine.

So just thought I'd flag it now so that you do check your new pump, to make sure it is definitely not going to cause a problem. Easy to double check right now, than majorly regret it later.

Best wishes.

[Kieron20V]

I think it was loose grit or sand in them from casting

[make420]

got engine !!

[hammer]

Today i drilled a 5mm hole at the Main Bearings from the Crankshaft, so i have 360° oil at the Rod bearings.

[andy10v]

You have access to some really cool tools!

[hammer]

New distances for my stiffening plate.

Bring rods and pistons to the same weight
Put the crankshaft in and look if everything is right. Crankshaft turns free but the Rods are 0.5mm crooked.
Next days i look with plastic gauge if the rods are good or ....

[hammer]

0.04 at the Main Bearings
And 0.05 at the Rod bearings. So everything looks good

[diesel des]

Put the crankshaft in and look if everything is right. Crankshaft turns free but the Rods are 0.5mm crooked.
Next days i look with plastic gauge if the rods are good or ....

What did you mean when you said the rods were 0.5mm crooked.

Sent from my HTC Desire HD A9191 using Tapatalk 2