80q b4 2.2 20vt project

[M2ki]

In here you can use ABY as comparison.

[Thuppu]

In here you can use ABY as comparison.

Yes, could be possible here also. Only you need to use same body/chassis(sedan) as comparison. Not many here in finland, and our car database didn't know the ABY sedan. Also everything needs to be like the comparison car. This has lowering springs, they would need to be proved to S2 sedan. Not many spring kits has this approvement.

[Thuppu]

This car is so fun! Have been driving a lot and everything seems to work fine. Seems to turn many heads even as the looks is like an basic 80. Maybe the violent sound has something to do with it haha...1st and 2nd gear wot between some buildings, screaming wastegate, bangs and some turbo shatter is quite effective attention-getter.

[Filip_FIN]

Congrats on the katsastus

Did the screamer pipe were like that when you were in katsastus?

[Thuppu]

Kiitos! Yes it was like that, except the heat shield(fitted it today, made of 1mm stainless). He didn't say anything about it, he was just looking at it with big eyes.

[Filip_FIN]

Kiitos! Yes it was like that, except the heat shield(fitted it today, made of 1mm stainless). He didn't say anything about it, he was just looking at it with big eyes.

Haha really , then i guess i can leave mine as it is

Any plans with the car circuits/drag events?

[sailaz]

Maybe the violent sound has something to do with it haha...1st and 2nd gear wot between some buildings, screaming wastegate, bangs and some turbo shatter is quite effective attention-getter.

Are you trying to say that with this exhaust you can pass 'katsastus' officially ?

[Thuppu]

Any plans with the car circuits/drag events?

No, no plans for this summer. Quite busy summer on the way, as there will be a couple of renovation projects, my holiday won't be a holiday.

Are you trying to say that with this exhaust you can pass 'katsastus' officially ?

Well, it's just the WG pipe, 99% of the exhaust gasses goes thru the main exhaust and cat(this of course originate of how much WOT driving you have ). In the end, they just measure the emissions from the tail pipe.

[Thuppu]

As the Vems ecu don't fit the orginal ecu position behind the dashboard, it has been hanging of the wires. But today I made a bracket for it under the glove box and covered it with a 2mm aluminium sheet cover, so it is safe from kicking feet.

[quattro-nick]

nice detail thomas but i would spray the grey aluminium piece black

[Thuppu]

It is the ECU.

Could have put a sheet behind the text, but now there is little air moving. It looks better in real life.

[sailaz]

next should be aluminium bracket/holder for VEMS LCD

[Thuppu]

Today I had an opportunity to meet a S2Forum member. _ShurikeN(Alexander) and his wife was visiting me, and we had quite good chats about these cars, and of course of lot of other things too. It was very nice to meet and I hope the rest of their holiday in Finland goes well.

[quattro-nick]

and you are the man in de right thomas?

[Thuppu]

Yes.