Brave man!
Announcement
Collapse
No announcement yet.
My Coupe project
Collapse
X
-
If you have easy access to it with your lift - Get it all off! I am doing this in phases on my back under the car and wish id done it in one go now as every time i get down to doing the next bit, i find trouble.
This was a blanking plug under the apparently intact looking rubber underseal.
Attached Files
Comment
-
Originally posted by B5NUT View PostAre they tie wraps holding down the chips Never in my days have I seen that before.
Comment
-
Originally posted by tango123 View Postwhat will you use to protect/ coat it when you’ve finished cleaning all the old stuff off & rust?
Epoxy paint (Novol protect)
Seam sealer (Bilt)
Epoxy underseal
Clear wax on hoses, wishbones, fittings etc (Bilt)
Should last well after that.
The original stuff has done a good job considering its over 27years old. I found patches of surface rust here and there, especially around seams at the back, mounting points and brackets that hold cables and hoses. The subframe mounts were completely full of dried soil. I've blown them out and will treat them to some cavity wax. I haven't found any holes which is a bonus.Nothelle S2 Avant
Black Ur project
Ocianic Ur project gone
S2 Coupe project gone
Urs6 plus project gone
- 2 likes
Comment
Comment