Another "Stroker" Project

[Billman]

twin scroll turbo???? That must be laggy What are your expectations of spool-up and max power?

Hehe.....2 bar at 4000 rpm on 3. gear would be nice and 500-550 if it works well! :-D

[Billman]

minor updates

[A80Avant]

you have missed a bolt...

aaah reminds me of something those pics...

[Billman]

nope...there's no hole.... :-p

[A80Avant]

oh well...
lets see how youll get on with it!

[quattro84]

Indeed.. let's see what that baby is gonna push!

[Billman]

Question: What cam belt covers do you use with the strokers?

[Billman]

Question: What cam belt covers do you use with the strokers?

Some Input please!!!

[Rocco]

Some Input please!!!

if the original from 2.2 it is not valid...may the original from A6 2.5tdi could fit
and if not..dont use it

good luck¡

[Billman]

i thought about it but i was hoping for something more precise! ;-)

[Billman]

put the head on today!!! ARP bolted till 95 ft/lbs

For now the timing is off but i am going to sort it out.

[caterpillar]

niiice projekt.... think you will like the new engine, and the torque(!!!!!)

[Billman]

Small update and a question: Thick blue line on the "A" side is stock position. In order to advance the exhaust cam by 5 degrees how much do i need to move it further to the A side, 2,5 degrees?

[GT500]

If you want 5 degrees move it 5! The double speed of the cams to crank dosen't come in in to it.
MOve it 5 and re check it'll be 5 different.

HTH

[Billman]

I need to find a starting point for the cam settings on the stroker. Both cams are 7A.
As i read the stroker topics there is said that due to the difference on deck height the cams are 5 degrees advanced. Does this mean i can simply put it on the marks and start from there?