Once I have the proper measurements I would like to take the intercooler to the machine shop and have them machine the inlet for the correct fit. Heating it a great idea though. I will keep that in my back pocket.
Announcement
Collapse
No announcement yet.
RS2 America
Collapse
This is a sticky topic.
X
X
-
-
Does the excess WGFV (N75) wiring just lay underneath the air box inlet? The wiring does not appear to be long enough to travel around the air box inlet.
I am also in need of the part number for the white clip that holds the connector to the rail.
20190724_212552_1.jpg
Comment
-
Originally posted by saltinot View PostDoes the excess WGFV (N75) wiring just lay underneath the air box inlet? The wiring does not appear to be long enough to travel around the air box inlet.
I am also in need of the part number for the white clip that holds the connector to the rail.
Comment
-
Originally posted by saltinotDoes the excess WGFV (N75) wiring just lay underneath the air box inlet? The wiring does not appear to be long enough to travel around the air box inlet.
I am also in need of the part number for the white clip that holds the connector to the rail.
20190724_212552_1.jpg
Comment
-
Cheers guys.
Greg, you mentioned a cover piece. Am I missing a part?
After some digging I came up with 443 972 614 as the number for the white clip that secures the grey N75 connector (seen at the very bottom of the picture above). I never found a picture of it online. They run about 4USD so I will take a gamble and see what I get.Last edited by saltinot; 14 August 2019, 16:41.
Comment
-
Originally posted by saltinot View PostCheers guys.
Greg, you mentioned a cover piece. Am I missing a part?
After some digging I came up with 443 972 614 as the number for the white clip that secures the grey N75 connector (seen at the very bottom of the picture above). I never found a picture of it online. They run about 4USD so I will take a gamble and see what I get.
Comment
Comment