Audi 80 Avant

[A80Avant]

Couldn't find anything at Costco. Maybe I'm looking in the wrong place

[A80Avant]

And jealous of the tinted glass of the polishing Frenchman I ordered some lightly tinted for mine all around

[Tonks4x4]

And jealous of the tinted glass of the polishing Frenchman I ordered some lightly tinted for mine all around

I ain't fitting it


Tonks4x4 - The Land Rover Specialist

[A80Avant]

I ain't fitting it


Tonks4x4 - The Land Rover Specialist

Hahaha! Let me do something Mr Tonks

You are just fitting springs on my car! And the occasional door trim!

[A80Avant]

Glass films have arrived and I will be using them at the fogs/corner lights initially as well as the rear ones. Not sure about the headlamps as they are already blackened so they may be too much.

[Christophski]

Let me know how you get on fitting this tint as I want to do my two vehicles with it Any tips or tricks would come in greatfully recieved

[A80Avant]

Here you go

Process and final result

Easy to fit. Quite thick and robust. Hair dryer works on bends and it looks as if it will last.

I'm not sure if I would use it on the Headlamps as they are blackened. But I surely want to use it at the rear lamps.

[A80Avant]

More product has arrrived for me.Rondo the rear lights.. now all I need is time to remove them and do them properly!

[Error404]

Looks great

[A80Avant]

[audinut]

what are the specs of your wheels?

[A80Avant]

They are Veloce 3.6 18inch et55. Currently on 245/35/18 on 7mm spacers front and 3mm rear.
Will be going back to 225/40/18 and staying on the 7mm spacer front while possibly removing the rear. I think the rear is sticking out a tad too much IMO

Their modifications are fully painted silver and the plastic decorative bolts replaced with stainless steel Allen bolts.

[@ndy]

what are the specs of your wheels?

EPIC.

[A80Avant]

[A80Avant]

I also bought a new bolt and nut to replace on one of the suspension bits. All covered with nice copper grease..