Originally posted by Thuppu
View Post
Announcement
Collapse
No announcement yet.
UrS4 2.2T Avant project
Collapse
X
-
Hahaa, thanks guys, appreciate your view in this matter. Just can't leave it alone, need to evolve things even that the previous version wasn't finished properly. Where can I get help?
Nick, I doesn't have any schedule for the next dyno.
Audi UrS4 Avant 2.5 20vt - twincharged - Project
Audi 80q B4 Sedan 2.2 20vt - Daily user
BMW 320d Touring e91 M-Sport - Daily user
BMW 740iA e38 - Project
Comment
-
The M90 was working good and boosting well from down low. But it was also quite heavily transmitted and was turning 18500rpm at 8000rpm engine speed. It was out of the efficiency map and was producing lots of heat that occurred espeasilly on track. I'm sure it would work well with a bigger pulley(less boost) and make less heat = more power. Well, it did make 624hp, quite good result for a twincharged engine with massive torque at 2krpm.
But my goal is now to make a twincharge setup with efficiency without compromises and for even higher power levels. M90 alone is good for max 350hp, M112 ~450hp. I will now run the M112 for about max 11krpm so it will be on the good area of the efficiency map. It will propably make less boost on low rpm, so maybe some small drop in down low torque, but midrange should be better with big size turbo.
Audi UrS4 Avant 2.5 20vt - twincharged - Project
Audi 80q B4 Sedan 2.2 20vt - Daily user
BMW 320d Touring e91 M-Sport - Daily user
BMW 740iA e38 - Project
Comment
-
At the time I ordered it, Gates racing wasn't available here in Finland. Now there is one shop that sells them, but I guess they have like 4 weeks order on them.
Audi UrS4 Avant 2.5 20vt - twincharged - Project
Audi 80q B4 Sedan 2.2 20vt - Daily user
BMW 320d Touring e91 M-Sport - Daily user
BMW 740iA e38 - Project
Comment
Comment