UrS4 2.2T Avant project

[Thuppu]

Mike, whats wrong with my brakes? Rocco have too nice and expencive parts , and I also want to fit the brakes under 16" wheels.

[europeanme]

Mike, whats wrong with my brakes? Rocco have too nice and expencive parts , and I also want to fit the brakes under 16" wheels.

all that power and no big brakes......your call.....

why 16"'s, I thought yours were at least 17"'s...

[Thuppu]

all that power and no big brakes......your call.....

why 16"'s, I thought yours were at least 17"'s...

Yeah, those I have now is 18". But you know, we have winter and frozen lakes here, klick.

[kenax]

Yeah, those I have now is 18". But you know, we have winter and frozen lakes here

Do HP2 brakes fit inside 16" wheels? If not, I'd rather get a new set of wheels for winter than to compromise braking with really small brakes..

[Zoig]

Do HP2 brakes fit inside 16" wheels?

Yes.

[quattrostyle]

they actually fit under some 15'' wheels, at least on my V8 with 15'' Aero's

[Thuppu]

Few days driving without silencers... need earplugs... propably my neighbours also.

Maybe we should continue with the exhaust... Here is the middle brace I did before, keeps both the exhaust and WG exhaust quite solid.



Got the middle Simons silencer in place today. Fitted with a V-band. Was supriced how much such a small silencer dampps the sound.

[Thuppu]

It's rice now.



The tip is just temporary, luckily, have a different type in mind. Was running out of gas. This is left of a 20L bottle. Almost all gone with this exhaust fabricating...










The sound is really quiet. Quite the same level as my old 3" stainless RAY exhaust.

[fish]

What´s your L/min when you are welding? I use my tig at least 5-6 hours a day and my 20l bottle lasts normaly about 2 weeks... I run 5l/min and i usualy only weld stainless sheetmetal between 1mm and up to 3mm.

[Rocco]

tomas, are these Simons silencers universal fittment?? Because i need one for my coupe

3" straight exhaust sistem,no cats,anything except a tiny Dhalback Racing last box

i need something for the middle¡

[quattrostyle]

tomas, are these Simons silencers universal fittment?? Because i need one for my coupe

Sure mate, something like this: http://www.nltuning.nl/virtuemart/rv...g-%D8-76,1-mm/

[Rocco]

Sure mate, something like this: http://www.nltuning.nl/virtuemart/rv...g-%D8-76,1-mm/

and are you sure it works?

i should ask you before buying a stupid piece of **** called " resonator" because it does nothing

my neighbourgs hates me....also my parents and my girlfriend

[Thuppu]

What´s your L/min when you are welding? I use my tig at least 5-6 hours a day and my 20l bottle lasts normaly about 2 weeks... I run 5l/min and i usualy only weld stainless sheetmetal between 1mm and up to 3mm.

First I used ~8L/min but then later used ~5L/min, and last when the gas was almost running out I used ~3L/min. Seems that you can use really small amount of gas when welding stainless.

[Thuppu]

tomas, are these Simons silencers universal fittment?? Because i need one for my coupe

3" straight exhaust sistem,no cats,anything except a tiny Dhalback Racing last box

i need something for the middle¡

Yes they are. http://www.kkdmotorsport.com/kauppa.php?k=1274624491

[tscheel]

Artwork!