Terrybullwon's Racing S2 coupe

[quattro-nick]

with pump do you use for diff cooling? nissan 200sx?

[terrybullwon]

with pump do you use for diff cooling? nissan 200sx?

tilton

[Mcstiff]

Don't buy Ast!

Your have to sort them and Dyno them your self. Buy Ohlins.

Thanks for the heads up! Too bad, they looked fairly reasonable (based on what's available on their site).

[Albert]

What length are the Sellholm blades on the rear ?

[terrybullwon]

What length are the Sellholm blades on the rear ?

I think 280mm i will have to check

[Albert]

I want to order them too. It would be helpful for me to know the length that fits

[terrybullwon]

Pretty much ready for set up.

[terrybullwon]

Base set up last Friday took a good few hours of work I can tell you.

Dry weight is now 980kg with out the following

Drivers seat
Pedal box
Bumper
Shifter tower
Engine harness
Ecu

Corner weights are pretty much 250kg a corner which I couldn't ask for more!

Front geo is much improved. It would be going for paint Monday but the toe change on bump is not great so I am building a new down pipe that will pass through a tunnel on the passengers side over the top of the steering rack.

This will give me a chance to drop the steering arms to where they need to be.

Finished winter project just alittle fab work left making new steering arms for the dampers and the tunnel and new down pipe.

[Error404]

Equal corner weights on a quattro is a fantastic achievement mate, well done
You need to go LHD on the new shell for an easier downpipe route!

[terrybullwon]

Equal corner weights on a quattro is a fantastic achievement mate, well done
You need to go LHD on the new shell for an easier downpipe route!

I think your be quite surprised of how easy my new exhaust will be.

One question for you as i know you have played with the RHD rack alot. I need to build a rack stop because where the engine has come back so far on full left hand lock i am going to hit the turbo hot side on compression.

have you got any internal pictures of the rack or a idea before i tear down this dumy one i have here on the car

cheers Chef

[terrybullwon]

also had the front end powder coated so its alittle more hard wearing

[Error404]

Yeah I think you could add stops at either end. Stu posted some pics from when he stripped a 3B rack years ago I'll try and find it

[Error404]

Here you go mate:

http://www.s2forum.com/forum/showthread.php?t=25808&highlight=Rack+rebuild

[dubmanted]

Absolutely awesome stuff

[my2000apb]

love this!!!!!!!!!!