Audi RS2 -94 Swe

[k.alle]

Oh, you are probably right.

I think there is some test procedure you can access with motronic to check all the electrical connections.
If I remember correctly it will switch on and off each injector, wgfv, N80, isv and such.
The TPS is involved somehow stepping through each component.
That way you at least know the wiring is correct, I looked at S2Central but couldnt find the instructions..

[ringbearer]

It is called output test on VagCom

[GT500]

Worth checking. Have you got the fuel pipes on the right way around?
great work!!!

[s0_big]

I have vagcom. Will test this when I get home. Thanks a lot for you effort to help.

[Avantus]

Worth checking. Have you got the fuel pipes on the right way around?
great work!!!

Was also thinking this... would explain all the symptoms.

[Kiku]

What will you be doing with your old ABY airbox?

[s0_big]

What will you be doing with your old ABY airbox?

Unfortunately the person before made some cuting to fit the rs2 intake pipe. But I can take pictures of it if you want. The heatshields will I keep though

[s0_big]

Today was the big day! Maybe some of you read at my other post that i had problems to get the fuelinjectors to open. Today i was at a Bosch service center and had the injectors cleaned and tested. After that she fired right up! Now i have to fix a small oil leak at the turbo oil return line and get myself a new oil pressure sender. Otherwise, all good so far, no strange noices or other faults so far.. Now i will have a beer and enjoy my work today!

Injectors at service at Bosch service center, only 4 at this picture. 3 ones delivered 75Ml, and 2 80ml, good enough according to service department.
45764-16348b0e23e69c1d9c4bc29718a1085d.jpg
Happy RS2 owner:
45764-de008309684b0d7490e38da1680e3301.jpg

Movie of start up:

[ThatGUY]

I'm jealous great work!

[_ShurikeN]

So nice to see the result of work. Enjoy it.

[s0_big]

Fixed an oil leak at the turbo oil feed that I found during start up. New Audi original oil pressure sender fitted, so now the oil pressure gauge is working properly. The idle is pretty rough but after I cleaned the ISV it was a little better but not good. Will look into that after I have driven the car and tested it on the road. Tonight I was finishing up the car for my testdrive tomorrow. But then my oil pressure indicator (the one for the oil pressure light) failed and the car was leaking oil like a waterfall... So I will have to change that before my test drive. Hopefully I will get a new sender tomorrow and will do a test drive anyway

Otherwise the car is ready for the road!

45764-6a0649f15caed222e17fe073139724ff.jpg

[s0_big]

How do I delete a post? I managed to post 2 times.

[Tractor Dave]

Where did you get your oil pressure sender from? I can't seem to find a new genuine one. I'm talking about the bigger cotton reel size one.
cheers
Dave

[s0_big]

Where did you get your oil pressure sender from? I can't seem to find a new genuine one. I'm talking about the bigger cotton reel size one.
cheers
Dave

Found it on eBay, payed like 100€ with shipping.

[Tractor Dave]

Ok, thanks.