Announcement
Collapse
No announcement yet.
Audi RS2 -94 Swe
Collapse
X
-
On the road after engine rebuild, 6 years since te last owner teared the engine down to pieces.
- 1 like
-
Well done my friend! Looks and sound like it should Seems to pull as it should as well. I have no idea why the idle is bad, though.
Did you use some kind of measuremenst before installing the rings on the rear hatch? I have mine on the shelf...
- 1 like
Comment
-
Thanks! Yeah, im pleased so far =) I have to find the problem with Idle, some body must have had this problem. I will have to search the forum. Regarding the Audi badge, i could see the "badge" in the paintwork, so i just put it in the same place (hopfully original place). When i look at pictures it seems that the Audi rings should be fittet little lower than the RS2 badge.
Comment
-
Took the car out on a cruise today. All good except for the idle.. Yesterday I cleaned the MAF connector and MAF connectors. But no difference. Really annoying. Anyway, today I let the car see some moore boost and revs, no problems luckily I think I will drive so I empty the tank and then do an oil/oil filter change.
Will keep you updated on the idle issue. Any help/tips is very welcome.
Comment
-
That's brave of you, driving it hard from day 1 after the re build
It's very tempting but I haven't got the balls to do the same in mine. I cant afford another re build
What oil are you using? I started off on cheap mineral for first 30 mins, then running in oil but changed back to mineral as my tappets didn't like it. I haven't done so many miles as I have a wheel bearing issue. Hopefully getting sorted on Thursday then I can slowly build the revs upNothelle S2 Avant
Black Ur project
Ocianic Ur project gone
S2 Coupe project gone
Urs6 plus project gone
Comment
-
If it fails it will fail anyway. I think you should drive it like you will later on. But I know, it's "nervous to push it. The only thing thats maybe needs to bed in is the piston rings. All other stuff like bearings and turbo should just work with full throttle directly.
Now I'm running a Mineral Kendall 20w50. After the first 500km I will change to Motul 15w50 synt. Same as I have in my Urs4. Hope you can drive soon! Think I have bad wheel bearings as well.. But that will be fixed later on.
Comment
-
This weekend i gave the car a better polish. I polished the car when i bought it to get rid of old ****, but it was not that good i thought. Used 3M products for the polish. The car is not vaxed yet.
Also today i brought the car in for MOT, it did not clear the inspection due to the rough idle i have, going mad at the idle. I have a thread here, for the fault finding: https://www.s2forum.com/forum/techni...rs2-rough-idle
Anyway, here is some pictures of the lady with some "make up"
45764-61aab4ae23b84a249125264c528b6863.jpg413685-3940979.jpg
413685-3940981.jpg
413685-3940978.jpg
413685-3940982.jpg
- 1 like
Comment
-
Originally posted by Tractor Dave View PostYes, your lady looks very nice with or without makeup!
Also love your immaculate garage. Is that a sunken lift you have?
Comment
-
Looking good Andre! How hi does it lift? I renovated my garage this winter, but the inside roofheight wont alllow a lift. But maybe a scissorlift...
Comment
-
Originally posted by fish View PostLooking good Andre! How hi does it lift? I renovated my garage this winter, but the inside roofheight wont alllow a lift. But maybe a scissorlift...
Comment
-
Small update on the partslist.. I was missing the airguides to the air filter box. Ordered what i think is enough parts to make it complete again, can't find good pictures of them installed. But i think i have them all hopfully. If anyone have good pictures of them mounted or seeing that i'm missing some parts to make it complete, please tell me. Will start install them some day. Hopfully on saturday i will bring the RS2 and my URS4 to a local Audi/VW old school meeting. First and last car meet of the year
45764-6e2bed146b0106e7104f815191d471af.jpgLast edited by s0_big; 11 September 2019, 16:38.
Comment
Comment