RS2 America

[newsh]

Yes, I know the caps for the wiper arms are faded. New ones are on the way.

In the meantime Autoglim Bumper Shine to the rescue!

[dest]

I used to love AG Bumper Care until I discovered Black Wow....

[WabTheKing]

what are you doing about the door strips on the out side? are you attaching these at a later date?

[saltinot]

I've got brand new door trims for the car that are still at the body shop unpainted. I am not installing them until the car has been wet sanded for the last time, which will not happen until I'm almost finished with assembly.



I'm not sweating it as there is plenty to play with ATM. However I would love to see them installed.

[bad8008]

dis Thread is a MUST SUBSCRIBE

salute mate.
what a lucky timing to spot this thread.
great work anyhow.

this is serious back-engineering.


need your advise on this; I'm replacing my stock shocks front and rear on the RS2, what other parts should I replace at the same time (after looking at the pictures of your suspension system refurb)?

[URQguy]

Booo Tom. I got excited to see an update and see a picture of two tools romping around in the Wasatch Mountains!!! Instead I get a picture of a 4 lug wagon with different body panels

[WabTheKing]

wow you really have thought of everything!!! hats off to you sir! :-)

[chapel]

vanity plate suggestion:
OCD RS2

[Error404]

or NEU RS2

Come on tom, get in the garage and give us some updates, we are all going cold turkey

[TimE-J]

Fantastic build so far!

[fastscirocco]

Tom

post an update or I'll post the picture of you!


Chris aka fastscirocco

[tecknoquatt]

keep it up Tom. its been a while since I looked at the progress. looking great !!

[Dan]

This thread is still awesome.

Definitely going to be using it as a resource when it comes round to my sedan build.

[veneto rs2]

no Stefano, the MAF is absolutely correct installed. the screws and the washers are exactly on the correct place. Check out your cars and have a look where the screws are...

Worked a bit on the RS2 on sunday and......

You (and Tom) are right: the MAF it's correctly mounted as shown on previous pictures.... thanks for correcting me.


Stefano

[saltinot]

Thank you for all the words of encouragement. You guys really do help keep this project going.

Worked a bit on the RS2 on sunday and......

You (and Tom) are right: the MAF it's correctly mounted as shown on previous pictures.... thanks for correcting me.

You should not doubt the RS2 masters young Jedi.

Good to see you on the forum Stefano. How's your new one? We need to start planning again for this summer.....that is if our wives will let us out of the house.