Announcement

Collapse
No announcement yet.

Audi 80 Avant

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • #61
    Is it like this?

    Also see here

    Comment


    • #62
      thats the compressor housing i have

      here is what i ordered

      http://www.turbodynamics.co.uk/cgi-b...2&ACTION=Go%21

      Comment


      • #63
        http://www.turbodynamics.co.uk/cgi-b...arch&PR=-1&TB=
        A&SS=901777-0012

        Comment


        • #64
          Link doesn't seem to work

          Comment


          • #65
            I have a 3076r .82

            Comment


            • #66
              Is it really loud then on full chat? I bet it whistles a little.
              Just some finishing touches to do now

              Comment


              • #67
                Sure does.

                Comment


                • #68
                  Ok it's half way down this page

                  Did Turbodynamics recommend it?

                  Comment


                  • #69
                    http://www.turbodynamics.co.uk/cgi-b...SS=901777-0012

                    this link should work

                    when i emailed them, this is what they suggested.Its a part similar to what holsets use for the same reason.I dont think it would eliminate it completelly, but any would be nice.

                    they make it themselves and it comes with screws to go to the holes found on the compressor housing 4inch housing.

                    The whistle is annoying yes...

                    Comment


                    • #70
                      "The whistle is annoying yes..." yes it is!!
                      Last edited by epic; 6 May 2010, 20:21.

                      Comment


                      • #71
                        That is the anti-surge housing you have.

                        Comment


                        • #72
                          yup.and with the ring, we are partially closing up the anti surge gap!

                          Comment


                          • #73
                            It's simply deflecting the pressure wave of the reversed flow into the colomb of air traveling towards the compressor making it ''bypassing" the compressed air over the wheel. Without the plate the air would travel up & out of your plumbing/airbox until it reaches the atmosphere. That's what's going on right there.

                            Comment


                            • #74
                              Ill give some feedback once fitted if it makes a difference in noise or perfomance

                              Comment


                              • #75
                                Think I might order one anyway anything to reduce the Banshee shreik! lol

                                Comment

                                Working...
                                X