Audi 80 Avant

[A80Avant]

The version I have is very new, with the wheelspeed incorporated in the ecu. Are you also running 1.2.30?

I'll take a photo of the settings shortly as well. This is with 225/45/17 tyres. I should have with the equation 139hz/100km but apparently 112 is what matches my GPS and speedometer as accurate speed so I used that.

[popdemonic]

Yes ,i have the correct firmware but my vems is early version with ps2 port.i already bought
The adapter for wheelspeed but didn't work out.a friend of mine is successfully running wheel
Speed function just uploading new firmware and setting the correct values on wheelspeed function.
I need to find some time checking on wiring job after the clutch job is done later Vas.

[A80Avant]

Here are the settings for the speed sensor:

uploadfromtaptalk1442605674307.jpg

These are the correct kph for the sensor to pick up the correct gear. It's really nice. Gears are picked up instantly!

Gear depended boost works perfectly as well. You can have as much or as little boost on any gear now. So buy buy flutter and surge. I reduced the 5th and 6th gear boost slightly and increased in 3d and 4th so as to not have any sort of delay and lag. Drives nicely!

[A80Avant]

A bit of blinguploadfromtaptalk1442743175045.jpg

[A80Avant]

[ATTACH]55546[/ATTACH]

[newsh]

[ATTACH]55546[/ATTACH]

[A80Avant]

[ATTACH]55564[/ATTACH]

[V6quattro]

Good work! I like it

[AndyP]

A bit of bling[ATTACH]55545[/ATTACH]

Is that one of those billet caps from USA?

[AndyP]

[ATTACH]55564[/ATTACH]

Bank robbery??!

[A80Avant]

Yes. No longer made apparently.

[A80Avant]

Yes kids and wife still in the car to throw people off

[A80Avant]

Paint is getting really bad. Could plasti dip correct chipping too? Didn't manage to get enough out of the bank for a proper respray!

[A80Avant]

A couple of photos from today's wash. I wish the paint was as good as it looks on the photos!



uploadfromtaptalk1449503009475.jpguploadfromtaptalk1449503018605.jpg

[A80Avant]

For those LHD cars that have done the vacuum servo conversion, my hose from the power steering pump to the rack went today and I had a spare to replace.

Part number 893422893ab

Thankfully audi tradition has this in stock as well so I ordered one to replenish my spares. This part is very crucial if you don't want a noisy power steering